Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Catalog No, 535-329 Printed in U.S,A. Form OM53-4 Pg 1 11-04 Replaces: New E_ll!1r_ [,...]!_iq[,.1,tJl/i_J_t;_._l_i/l,l[cl,t] During Setup and Programming: Pressing the Mode button selects different flashing items (represented in black). ,,..,:00A oLo;: Pressing the Up and Down buttons will modify the flash LuSto°cDS 123 SuM: ThF S:ing selection. AUTO OFFON Locked O_ O COOL Override H EAT Fanll| D Mode Indicators Selects the operation mode of the equipment. COOL --indicates the air conditioning mode. HEAT --indicates the heat mode. AUTO --indicates the system will automatically changeover between the heat and cool modes as the temperature varies. OFF --indicates the entire system is turned off. PROGRAM ON --indicates the stored program is enabled to run. See page 3. Clock with Day of the Week Indicates the current time and day. This clock is also used to program the timer periods. See this page. [] Room Temperature Display Indicates the current room temperature. ]Desired Set Temperature Indicates desired room temperature(s). See page 3. [-_ Override Indication Indicates the current program is currently being overridden for up to 4 hours. See pages 3 and 5. [] Occupied or Unoccupied Indication Indicates the program number: Occupied 1,2, 3, or Unoccupied. See pages 3 and 4. [] Setup Indication Indicates the thermostat is in the programming mode. See page 4. ]Fan Operation Indication Fan ,ll --indicates constant continuous fan operation. When Fan On Icon is not lit --indicates the fan will only operate when necessary to heat or to cool. ]Locked Indication Locked appears after the right combination of buttons are pressed, rendering the buttons inoperative. See page 5. F_ Start/Stop Indication Start or Stop appears when programming timer functions. See page 3. Press the Set Clock button SET CLOCK to exit Setup screens. To adjust the clock or Day use t[.UUPm \ /' buttons. TO adjust the clock or Day use s!'s buttons. Press the Set Clock button to exit Setup screens. SET CLOCK O The thermostat is preprogrammed from the factory to operate equipment without the need for further programming. To optimize the installation of this thermostat follow the instructions in the Advanced Setup section. NOTE: The thermostat is not preprogrammed from the factory to operate heat pump systems. To control these systems, follow the steps #7the Advanced Setup section, page 4. Page 2 Select Mode The HEAT setting indicates the temperature the room has to reach before the unit will turn on to heat the room. T +U .g The COOL setting indicates the temperature the room has to reach before the unit will turn on to cool the room. _ © COOL +U AUTO will automatically select heat or cool based on room temperature demand. AUTO '+;_$t _ o COOL HEAT .g Program On will activate the ProgramOn stored timer operation. (Occupied and Unoccupied uncoupled periods.) !! +.+ili,+.i. OFF indicates the system is turned off. oi Select Desired Temperature In any mode, adjust the with 7 desired Set Point Temperature COOL buttons. Pressing the up/down buttons in Auto mode will adjust both the heat and cool set point temperatures simultaneously. Pressing the up/down buttons in Heat or Cool modes will adjust only the heat or cool set point temperaTUre. Override PressDuring programmed, unoccupied periods a press of the Override ov°°°,°° 0 button will force the thermostat into Occupied 1 comfort settings, temporarily. With each successive push of the Override button, the override tim er will add 30 minutes, until the maximum of 4 hours is reached. Then the next press will zero out the override timer, returning to unoccupied if there are no further button presses. When in Override, the Override icon and the Occupied 1 icon U • _ _Pm appear on the display. Su occupied 1 The time of day clock alternates with the time remaining in override. "I ,o_? During Override, the set point 121 "=HEAT temperatures are adjustable, pro- I,: vided the keypad is not locked. Press the Program button to enter PROGRAM time period programming, Select the maximum number of occupied periods to be Typically 1. (1,2 or 3) ) used on any one day. _) Adjust the cooling set point for occupied 1. _J) (35 to 99 F) Adjust the heating set point for occupied (35 to 99 F) 1. _) (_ Adjust the cooing set point for unoccupied periods. (35 to 99 F) unoccupied Adjust the heating set point for unoccupiedperiods. (35 to 99 F) Select the day for Occupied 1. (M-Su) Adjust the start time for occupied 1. | • PAl I..! < < (_ Adjust the stop time E" !3 !3 for occupied 1. On Select Occupied 1 to run q on (On), or not torun this thisthis day dayday (Off). Off ON COOL ( 1(::( HEAT I? 8_ COOL (()() HEAT SS Page 3 to midnight and from midnight to the stop time on the same day. For example: 9:00pm start, 8:00am The copy command becomes available after the maximum number of occupied stop, on Monday. In this example the program run from 12:00am Monday to 8:00am Monday will and Yes periods are programmed in a day. This example...