Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Aube Technologies Dateigröße: 476.39 kb Dateiname: 44760.pdf Unterrichtssprache:

By saving energy, your thermostat will pay for and operating your thermostat. itself during its first season of use. Thank you for buying a If you require further assistance, call Hunter Support at 888 Hunter product! 830-1326 from 8 AM to 5 PM Central Time. Model Information: Model Number ___________________________________________ 44760 Serial Number____________________________________________ Date Purchased __________________________________________ Where Purchased _________________________________________ 3 Table of Contents INTRODUCTION Read This Before Installing Thermostat Features INSTALLATION What You Need Remove Old Thermostat Wire Labeling Mount Wallplate and Thermostat Connect Wires and Mount Thermostat to Wallplate PROGRAMMING Option Menu Setting Time and Day 12 Hr. / 24 Hr. Time Format Programming Introduction Personal Program Schedule Programming Weekday/Weekend Programming 7-Day Programming Everyday Programming (continued) 41652_model44760_web.pmd 4 Table of Contents (continued) 4 PROGRAMMING (continued) Program Options 30 Programmable Fan Reviewing Programs OPERATIONS Power Switch System Selection Key Fan Key 33 System Indicator Light Emergency Heat Reviewing the Current Temperature Setting Temporary Manual Override Permanent Manual Override Vacation (Programmable) Hold Auto Season Changeover Home Today Energy Monitor Filter Monitor SPAN Settings 5 OPERATIONS (continued) Auto Recovery Keyboard Lock Backlighting (INDIGLO® Night-Light) SAFETY FEATURES AC Power Monitor Low Battery Warning Error Mode TROUBLESHOOTING Problems & Solution Technical Support WIRING DIAGRAM Heat Pump Systems 41652_model44760_web.pmd Read This Before Installing Thermostat IMPORTANT 1 1 Read the entire installation section of this Owner’s Manual thoroughly before you begin to install or operate your Hunter Thermostat. Remove the Mylar label from the LCD display window. INSTALLATION 2 2 All installation is normally performed at your thermostat. ARMCHAIR PROGRAMMING 3 3 You can program your thermostat before installation by inserting the batteries and following the instructions starting on page 16. This can be done while you relax in your favorite chair and is a very good way to familiarize yourself with all the functions of your Hunter Thermostat. SYSTEM COMPATIBILITY 4 4 Your Thermostat is designed to operate these 24-Volt systems: ¦ Multi-stage heat pumps with auxiliary heat ¦ Single-stage heat pumps This thermostat will not control 120/240 Volt systems or millivolt systems. COMPRESSOR PROTECTION 5 5 The thermostat provides a 3.5 minute delay after shutting off the heating or cooling system before it can be restarted. This feature will prevent damage to your compressor caused by rapid cycling. 7 TEMPERATURE RANGE 6 6 Your thermostat can be programmed between 45°F and 95°F (7°C and 35°C). However, it will display room temperatures from 15°F to 99°F (-9°C and 37°C). “HI” will be displayed if the temperature is higher than 99°F (37°C), and “LO” will be displayed if the temperature is lower than 15°F (-9°C). AUTO RECOVERY 7 7 Your thermostat is set from the factory to gradually recover the room temperature from an energy saving program to your comfort program. Therefore, the thermostat may turn your system on several minutes prior to your programmed time. This operation is normal, but can be turned off. Refer to the Options Menu information on pages 16. OPERATION 8 8 This system operates on your system’s 24 Volt power supply. The supply is monitored by the thermostat, and it will stop functioning if AC power is lost. (When using backup batteries, “No AC Pwr” will be displayed.) All system controls will remain off until power is restored. NOTE: The INDIGLO® Night-Light will not function when AC power is lost. BATTERY WARNING 9 9 Fresh alkaline batteries will provide over one year of memory backup and clock operation. However, when the batteries become drained, a low battery warning will appear on the display. When this message occurs, install 2 new AAA batteries. You have approximately 30 seconds when changing the batteries to keep thermostat’s clock and program settings. NOTE: The default system selection at power-on is HEAT. Batteries are recommended to prevent an undesired system change due to a power outage. 41652_model44760_web.pmd 8 Features INDIGLO® Night-Light Alpha-numeric display shows time, day, temperature, Home Today: Overrides energy-saving program activated by pressing any key. Energy Monitor: Measures and displays heating and cooling system operating time for Today, Yesterday, This Month, Last Month, or Total. By monitoring your energy usage, you can program the thermostat to optimize energy savings. temperatures while you are at home for the day. program number, and other feature information as required. Power Switch: Select ON, Positive OFF, or Emergency Heat. Soft-touch programming keypad, see details below. Temperature Keys: Keys for raising or lowering temperature settings. Reset: Press with a paper cl...

Herunterladen

Geben Sie zwei Ziffern: