Stimmen - 3, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
BG Opacity: Select the opacity for the background color. 6.BLUE SCREEN: Press VOL+/VOL-to select ON or OFF. To set ON, the screen will turn blue if there is no signal. 7.ASPECT RATIO(not available in PC): To select NORMAL, WIDE and ZOOM .(WIDE is only available in some models) 8.TIME Press CH+/CH- to select this item and VOL+ to enter and display as the following: TIME DATE/TIME TIMER ON TIMER OFF SLEEP TIMERTIME ZONE DAYLIGHT OFF ALASKA ON DATE/TIME: Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. Press VOL+ to enter the following menu to set: DATE/TIME MODE DATE TIME MANUAL 01/01/2005 00:00 DATE 01/01/2005 TIME 00:00 Setting MODE to AUTO or MANUAL. DATE and TIME can only be available in MANUAL mode. Press VOL+/VOL- to select the position you want to change and CH+/CH- to set. TIMER ON: Press VOL+ to enter the submenu to set. When this function is used, the TV can automatically turn the power on at the present time in the standby status and display the preset program. Menu Operations Menu Operations Function Menu Options Continued ON TIME --:-TIMER ON MODE OFF ON TIME --:- Press CH+/CH- to select MODE and VOL+/VOL- to set it OFF/DAILY/ONCE. Press CH+/CH- to select ON TIME and VOL+ to enter. Press VOL+/VOL- to select the position you want to change and CH+/CH- to set. TIMER OFF: Press VOL+ to enter the submenu to set.. Using this function can turn the TV set automatically into standby status at the preconcerted time. Same as adjustment of TIMER ON . SLEEP TIMER: The sleep timer automatically shuts off the TV after a preset time (from 0 to 120 minutes) TIME ZONE: This functionallows you to select your local time zone. Broadcasted time information will correct the clock display for your local time. DAYLIGHT: DAYLIGHT is automatically set by specially broadcasted signals. This menu item allows you to disable the automatic setting of daylight. This is useful if you live in an area or state where daylight is no applied, but you receive channels from other areas where daylight signals are broadcasted. 9. OSD TIMEOUT: Press to set the time of the OSD displaying on screen. 10. RESET : Press VOL+ to reset some settings to the factory default . Adjust Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen ADJUST AUTO CONFIG PHASE 0 CLOCK 0 H POSITION 0 V POSITION 0 Note: This menu appears only in PC mode . 2. Press CH+/CH- button to enter the adjust menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved .. Menu Operations Menu Operations Adjust Menu Options Continued Functions: AUTO CONFIG : Automatically adjusts picture location frequency and phase parameters . PHASE : Removes any horizontal distortion and clears or sharpens the displayed characters . CLOCK : Adjust the TFT-LCD to match the PC input source clock frequency H POSITION : Picture horizontal position adjust V POSITION : Picture vertical position adjust . Channel Menu Options 1. Press MENU and VOL+/VOL- button until the following menu appears on the screen CH NO 11.1 NAME TUNER CABLE SKIP OFF AFC ON FINE TUNE AUTO SCAN CHANNEL . 63.25MHZ Only available in analog signal Note: This menu appears only in TV mode . 2. Press CH+/CH- button to enter the channel menu and to go up and down to select the desired option . 3.Press VOL+/VOL- button to increase and decrease the level to adjust the selected option to your preference . 4.Repeat step 2 and step 3 until desired settings have been achieved . Functions: 1. CH NO. : Press VOL+/VOL-to go up and down to set the channel number. The display will show the current playing channel. 2. NAME: Allows you change the name of the channels in analog signal. And display the channel name automatically in digital signal. Menu Operations Menu Operations Channel Menu Options Continued 3.SKIP : If you want skip a channel , pressVOL+/VOL-to select ON , and this channel will be skipped next time when you pressCH+/CH-. You can press the digit buttons to select the channel . If you want to restore the channel , select OFF. 4. AFC : Auto frequency control. Select ON to improve image quality . 5. FINE TUNE : If the image or sound received is not very good , you can press CH+/CH-to select FINE TUNE in the menu . Then , press VOL+/VOLbutton to adjust and improve the image quality. Do not use this feature unless reception is poor. 6. TUNER : Press VOL+/VOL- button to select AIR (VHF and UHF) and CABLE reception preference. 7. AUTO SCAN : Auto search and program channels .Press the VOL+ button to start to search and the following menu will appears on the screen: AUTO SCAN NO YES Press CH+/CH-or VOL+/VOL-to select YES and MENU to confirm then the automatic search function operation. All channels now available will be automatically pre...
Dieses Handbuch ist für folgende Modelle:Fernseher - HLC19W (2.99 mb)