Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Important Safeguards and Pre cau tions
OUTDOOR ANTENNA INSTALLATION
READ AND RETAIN ALL SAFETY AND
OPERATING INSTRUCTIONS. HEED ALL
1 SAFE ANTENNA AND CABLE CONNECTION
WARNINGS IN THE MANUAL AND ON UNIT
An outside antenna or cable system must be properly grounded
to provide some protection against built up static charges
INSTALLATION
and voltage. Section 810 of the National Electrical Code,
ANSI/NFPA 70 (in Canada, part 1 of the Canadian Electrical
1 POWER SOURCE CAUTION
Code) provides information regarding
Operate only from power source indicated on unit
proper grounding of the mast and
ANTENNA
LEAD IN
or in this manual. If uncertain, have your Electric
WIRE
supporting structure, grounding of the
GROUND
Utility Service Company or Video Products Dealer
CLAMP
lead-in wire to an antenna discharge
ANTENNA
verify your home power source.
DISCHARGE UNIT
(NEC SECTION 810-20)
unit, size of grounding conductors,
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
location of antenna discharge unit,
(NEC SECTION 810-21)
2 POWER CORD PLUG
GROUND CLAMPS
con nec tion to grounding electrodes,
POWER SERVICE GROUNDING
For safety, this unit has a polarized type plug (one
ELECTRODE SYSTEM
and requirements for the grounding
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
wide blade), or a three-wire grounding type plug.
electrode.
Always hold the plug fi rmly and make sure your
hands are dry when plugging in or unplugging the AC
2 KEEP ANTENNA CLEAR OF HIGH
power cord.
VOLTAGE POWER LINES OR CIRCUITS
Regularly remove dust, dirt, etc. on the plug.
Locate an outside antenna system well away from power lines
POLARIZED PLUG CAUTION:
and electric light or power circuits so it will never touch these
The plug fi ts into outlet only one way. If it cannot be
power sources should it ever fall. When installing antenna,
fully inserted, try reversing it. If it still will not fi t, have an
absolutely never touch power lines, circuits or other power
electrician install the proper wall outlet. Do not tamper
sources as this could be fatal.
with the plug.
GROUNDING PLUG CAUTION:
USING THE UNIT
The plug requires a three-hole grounding outlet.
If necessary, have an electrician install the proper
Before unit is brought out of storage or moved to a new location,
outlet. Do not tamper with the plug.
refer again to the INSTALLATION section of these safe guards.
1 KEEP UNIT WELL AWAY FROM WATER OR MOISTURE,
3 POWER CORD
such as vases, sinks, tubs, etc.
To avoid unit malfunction, and to protect against
electrical shock, fi re or personal injury:
2 IF EXPOSED TO RAIN, MOISTURE, OR STRONG IMPACT,
- Keep power cord away from heating appliances and
unplug unit and have it inspected by a qualifi ed service
walking traffi c. Do not rest heavy objects on, or roll
technician before use.
such objects over the power cord.
3 ELECTRICAL STORMS
- Do not tamper with the cord in any way.
During a lightning storm, or before leaving unit unused for
- An extension cord should have the same type plug
extended periods of time, disconnect all equipment from the
(polarized or grounding) and must be securely
power source as well as the antenna and cable system.
connected.
4 WHEN UNIT IS PLUGGED IN
- Overloaded wall outlets or extension cords are fi re
• DO NOT OPERATE IF:
hazards.
- liquid has spilled into unit.
- Frayed cords, damaged plugs, and damaged or
- unit was dropped or otherwise damaged.
cracked wire insulation are hazardous and should
- unit emits smoke, odours, or noises.
be replaced by a qualifi ed electrician.
Immediately unplug unit, and have it inspected by a service
technician to avoid potential fi re and shock hazards.
4 DO NOT BLOCK VENTILATION HOLES
• Never drop or push any object through openings in unit.
Ventilation openings in the cabinet release heat
Touching internal parts may cause electric shock or fi re
generated during operation. If blocked, heat
hazard. Do not put any foreign object on the tray.
build-up may result in a fi re hazard or heat
• Keep magnetic objects, such as speakers, away from unit to
damage to cassettes or discs.
avoid electrical interference.
For your protection:
a.Never cover ventilation slots while unit is ON,
5 USING ACCESSORIES
or operate unit while placed on a bed, sofa, rug,
Use only accessories recommended by the manufacturer to
or other soft surface.
avoid risk of fi re, shock, or other hazards.
b.Avoid built-in installation, such as a book case
6 CLEANING UNIT
or rack, unless properly ventilated.
Unplug unit. Use a clean, dry, chemically untreated cloth to
gently remove dust or debris. DO NOT USE cleaning fl uids,
5 AVOID EXTREMELY HOT LOCATIONS OR
aerosols, or forced air that could over-spray, or seep into unit
SUDDEN TEMPERATURE CHANGES
and cause electrical shock. Any substance, such as wax,
Do not place unit over or near a heater or radiator,
adhesive tape, etc. may mar the cabinet surface. Exposure to
in direct sunlight, inside closed ve hi cles, in high
greasy, humid, or dusty areas may adversely affect internal
temperature [over 95 °F (35 °C)], or in over 75%
parts.
humidity. If unit is suddenly moved from a cold place
to a warm one, moisture may con dense in unit and
SERVICE
on the tape causing dam age. Never sub ject unit to
vibration, im pact, or place it so that the sur face is tilted
1 DO NOT SERVICE PRODUCT YOURSELF
as in ter nal parts may be se ri ous ly dam aged.
If, after carefully following detailed operating in struc tions, the
unit does not operate properly, do not attempt to open or remove
6 TO AVOID PERSONAL INJURY
covers, or make any adjustments not described in the manual.
• Never place unit on support or
Unplug unit and contact a qualifi ed service tech ni cian.
stand that is not fi rm, level, and
2 REPLACEMENT OF PARTS
adequately strong. The unit could
Make sure the service technician uses only parts specifi ed by
fall causing serious injury to a
the manufacturer, or have equal safety char ac ter is tics as original
child or adult and damage to the
parts. The use of unauthorized substitutes may result in fi re,
unit.
electric shock, or other hazards.
• Move any appliance and
cart combination with care.
3 SAFETY CHECK AFTER SERVICING
Quick stops, excessive force, and uneven surfaces
After unit is serviced or repaired, request that a thorough safety
may cause objects to overturn.
check be done as described in the manufacturer’s service
• Carefully follow all operating instructions.
literature to ensure video unit is in safe operating condition.
2
...Dieses Handbuch ist für folgende Modelle:
Fernseher - PVDM2793 (3.81 mb)