Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Open the battery compartment cover. 2. Install two “AA” batteries. 3. Replace the battery compartment cover. 12 13 14 15 16 17 18 19 1. TV/CATV Switch -Used to select the TV or Cable Box to be operated. (You can operate your cable box after you have programed the remote control.) 2. VCR/DVD switch -Used to select the VCR or DVD to be operated. (You can operate your VCR or DVD after you have programed the remote control.) 3. DISPLAY Button -Displays the current status time, channel (or Input), the present settings on the TV screen. 4. SLEEP TIMER Button -Sets the TV to turn off automatically after up to 120 minutes. 5. AUDIO SELECT Button -Switches sound between mono and stereo, and SAP when receiving broadcasts in stereo or SAP. 6. MUTING Button -Press to turn off the sound. Press again to turn the sound back on. 7. C.C. (Closed Caption) Button -Switches between Caption, Text and TV modes for Closed-Captioned programs. 8. STANDARD Button -Press to reset the On-Screen picture adjustments or Audio adjustment to their factory preset positions. 9. CH +/– Buttons -Press the + button to change to a higher numbered channel set into memory. Press the – button to change to a lower numbered channel set into memory. Press to select the desired item during On-Screen operations. 10. MENU Button -Press to display the On-Screen menu function. 11. VCR or DVD Operation Buttons -Press to operate your VCR or DVD. 12. POWER Button -Press to turn the TV on or off. 13. INPUT Button -Switches between the TV and external input sources. 14. 10-key pad -Allows direct access to any channel of the TV, VCR or Cable box. 15. RETURN Button -Switches between the present channel and the last channel selected. 16. LIGHT Button -Press to turn the illumination on for CH +/– and VOL +/– buttons. 17. ENTER Button -Press to enter selected setup. 18. VOL +/– Buttons -Press the + button to increase, or the – button to decrease the volume level. Press to select the desired setting or arrangement during On- Screen operations. 19. EXIT Button -Press to exit the On-Screen menu function. REMOTE CONTROL (CONTINUED) REMOTE CONTROL BASICS • Before you can operate the remote control, you must first install the batteries (included). See “Changing the Batteries” on this page above for instructions. (For an illustration, please see page 6.) • Press the POWER button to turn the television on or off. • Make sure the TV/CATV switch is set to TV. Move the switch to CATV only if you need to operate a cable box. • Slide the VCR/DVD selector switch to VCR to control a VCR, slide to DVD to control a DVD player. Please see pages 8 to 10 for instructions on programming your remote control to operate a Cable box, VCR or DVD player. • Press the CH + and CH – buttons to scan through the channels. Tap the CH + or CH – button to move through the channels one channel at a time. • Press VOL + or VOL – to raise or lower the volume. An indicator bar will appear on screen to show you the television volume level. • The CH +/– and VOL +/– buttons are also used to navigate JVC’s on screen menu system. • You can directly access specific channels using the 10-key pad. • This remote includes illuminated buttons for key features like CH +/– buttons, and VOL +/– buttons. Press the LIGHT button to turn the illumination on. CHANGING THE BATTERIES Push down on the remote’s back cover and slide towards the bottom to remove it. Insert two AA batteries (supplied), carefully noting the “+” and “–” markings on the batteries and on the remote control. To avoid a potential short circuit, insert the “–” end first. Be sure to use only size AA batteries. When batteries are installed, slide the cover back into place (until it clicks into position). • If the remote control acts erratically, replace the batteries. Typical battery life is six months to one year. We recommend using alkaline batteries for longer battery life. When you change the batteries, try to complete the task within three minutes. If you take longer than three minutes, the remote control codes foryour VCR, DVD, and/or Cable Box may have to be reset (pages 8-10). BATTERY PRECAUTIONS The precautions below should be followed when using batteries in this device: 1.Use only the size and type of batteries specified. 2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first. 3.Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones. 4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.) 6.When you change the batteries, try to complete the task within three minutes. If you take longer than three minu...
Dieses Handbuch ist für folgende Modelle:Fernseher - AV 20F704 (1.05 mb)