Stimmen - 5, Durchschnittliche Bewertung: 3.6
(
)
)
|
Anleitung Zusammenfassung
Set the teletext language group that corresponds to the language of the teletext program that you want to watch. 1 Choose TELETEXT LANGUAGE, then press the MENU/OK button. TELETEXT LANGUAGE DIGROUP-1 ] GROUP-2 GROUP-3 GROUP-4 ▲ RT| OK 4 l> Rm EXIT i ▼ fig BACK 1 2 Press the A/T buttons to choose a group. Group Languages GROUP-1 Turkish, Hungarian, English, German, French, Italian, Spanish, Portuguese, Greek, Swedish, Finnish GROUP-2 Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian, Hungarian, German, French, Italian, Swedish, Finnish GROUP-3 Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainan, Serbian, Croatian, Slovenian, Czech, Slovak, English, German GROUP-4 Arabic, Czech, Slovak. Hungarian, English, German, French, Italian, Spanish, Portuguese, Swedish, Finnish Languages that are not included in the teletext language group that you select, the sub-titles of the teletext program will not be displayed properly. 34 3 Press the MENU/OK button to complete the setting. The menu disappears. Using the TV's menu DEMO menu The DEMO function automatically demo-strations some of the TV function. When the DEMO function is set to ON: Each time the TV is turned on, the demonstration starts automatically. If you do not want that to happen, set the DEMO function to OFF. 1 Press the A/Y buttons to choose ON. To cancel the DEMO function, choose off. 2 Press the MENU/OK button to complete the settings. The DEMO function is set to ON, and the demostration will start. To stop the demonstration: Press one of the button on the remote control. 35 Additional preparation ■ Connecting the external devces Connect the devices to the TV, paying attention to the following connection diagram. Before connecting anything: • Read the manuals provided with the devices. Depending on the devices, the connection method may differ from the figure. In addition, the device settings may be changed depending on the connection method to secure proper operation. • Turn off all the devices including the TV. • The "Specifications" on page 43 contains the details of the VIDEO terminals. If you are connecting a device not listed in the following connection diagram, see the "Specifications" to choose the best VIDEO terminal. • Note that connecting cables are not supplied. • When connecting devices that are supported by AV COMPU LINK, see "Connecting AV COMPU LINK Supported Devices" on page 38. © VCR (composite signal) © VCR (S-VIDEO signal; Y/C) @ VCR for recording (composite signal) 4 DVD player (composite signal) © DVD player (S-VIDEO signal; Y/C) © DVD player (component video signals; Y/Cb/Cr) © TV game (composite signal) ® TV game (S-VIDEO signal; Y/C) © Camcorder (composite signal) ® Camcorder (S-VIDEO signal; Y/C) © Headphones ® AV COMPU LINK cable 36 Additional preparation Connecting methods 1 Connect the TV's VIDEO jack and the device's VIDEO Out (video output) jack with a video cable. If connecting a device to the TV with an S-VIDEO cabel : Connect the VCR's S-VIDEO OUT (S-VIDEO output) connector and the TV's "S" (S-VIDEO) connector with an S-VIDEO cable, instead of connecting with a video cable. Note that the connection with a video cable will be ignored in case you conect a VCR to the TV with both video cable and S-VIDEO cable. If connecting a DVD player to the TV with a component video cable: Connect three jacks (Y/VIDEO, Cb and Cr) in the VIDEO-3 terminal and the DVD player's COMPONENT (component video output) jacks with a component video cables, instead of connection with a video cable. Then set the VIDEO-3 SETTING to COMPONENT, according to "VIDEO-3 SETTING" on page 28. • This Television is compatible with the Progressive video signal (525P signal). (When the component video signal is input.) If you have a DVD player that outputs Progressive video signals (525P) as a component video signal, then by attaching the device to the television with a component video cable you can see the actual images that are recorded on a DVD disc as an original image source. If connecting a device to the VIDEO-3/COMPONENT terminal with a video cable: Connect the TV's Y/VIDEO jack and the device's VIDEO OUT (video output) jack with a video cables. Then set the VIDEO-3 SETTING to VIDEO according to "VIDEO-3 SETTING" on page 28. • In the VIDEO-4 terminal, the VIDEO jack is indicated by "V". 2 Connect the TV's AUDIO jacks (L/MONO and R) and the device's AUDIO OUT (audio L/R output) jacks with an audio cable. If the device's sound output is in mono : Connect the device's AUDIO OUT jack and the TV's L/MONO jack with an audio cable. Connecting devices to the OUTPUT terminal The signals of the images and sound you are currently viewing with this TV are output through the OUTPUT terminal. By connecting a VCR to the OUTPUT terminal, you can record the currently shown image and sound to that VCR. To do this, connect the VCR and OUTPUT terminal following the steps below. 1 C...