Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung JVC, modell WD-65C8

Hersteller: JVC
Dateigröße: 3.07 mb
Dateiname: e0793da4-dff3-434b-869e-3d5dc7b0cbbf.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Controlling Sound Volume Press • VOL / to adjust the sound level. See also “Controlling A/V Receiver Sound Volume” on • page 15. Changing Channels (antenna sources) To change channels: Enter the channel number using the number keys • on the remote control and press ENTER. For a two- part digital channel, such as 3-1, press 3 — CANCEL 1 to enter a dash (separator). Press • CH/PAGE / to change channels one channel at a time. Press and hold • CH/PAGE / to move quickly through channels. Press • QV (QuickView) to switch back to the previously tuned channel. Press • GUIDE to display ChannelView channel listings, highlight a channel, and press ENTER to select. Use the Fav (Favorites) feature to set up lists of • favorite channels and tune to them with the FAV key. See Setup > Edit > Fav 1–Fav 6 on page 44. NOTE: Perform channel memorization to make finding channels easier. See Setup > Scan, page 43. 23 29 11 2 3 4 5 2524 27 28 26 17 18 1 23 29 11 2 3 4 5 2524 27 28 26 17 18 1 4. TV Operation and Features Remote Control 1. POWER: Turns TV power on and off. 2. Slide Switch: Selects the A/V device to be operated by the remote control. Set the slide switch to TV for operation of the TV, and NetCommandcontrolled devices. Control of additional devices requires programing (see Appendix C, “Programming the Remote Control.” 3. SLEEP: Sets the TV to turn off within 2 hours in increments of 30 minutes. 4. Digits/Letters: Press digits for channel numbers, then press ENTER for faster tuning. Use numbers and the — CANCEL key to enter digital sub-channel numbers. Use also for entering letters or names in menus. To select letters when naming channels, repeatedly press the associated number key. Press ENTER to set the letter. Special characters are available with the 1 key (!, &, blank space) and 0 key (/, *, -). 5. —/CANCEL (SUB-CHANNEL/CANCEL): When entering digital channel numbers, adds a separator between main and sub-channel numbers. Clears Fav and some menu entries. 6. QV (QuickView™): Switches between the current channel and the last channel viewed. 7. MUTE: Turns TV sound on and off. 8. SPLIT: Not used in this model. 9. FAV (Favorites): Scans through memorized lists of favorite channels. See Setup > Edit > Fav1–Fav6 on page 44. 10. VOL / (Volume Up/Down): Changes sound level. 11. CH/PAGE / (Channel or Page Up/Down): Scans up or down through memorized channels. Pages up and down through screens when used with ChannelView™. 12. FORMAT: Changes the shape and size of the TV picture. 13. LIST (835 Series): Works like the LIST key for a cable box or satellite receiver when “learned” for NetCommand or when the remote has been programmed for the device. 14. INPUT: Displays the Input Selection menu from which you can select an input source to view, such as an antenna input (ANT 1/2) or a connected device. 15. (Adjust Up/Down/Left/Right): Navigate menus and change settings. 16. ENTER: Selects a channel number or menu item. 7 8 10 6 9 12 13 14 15 16 19 20 21 22 17. GUIDE: Displays or removes ChannelView™ channel listing for ANT 1 and ANT 2. Displays DVD disc or top menu for a NetCommand-controlled DVD player. Displays the guide for a NetCommand-controlled cable box or satellite receiver. 18. INFO: Displays an on-screen summary of the current device in use and any broadcast information available, including current V-Chip ratings information. See “Status Display,” page 30, for details. 19. AUDIO: Selects individual audio settings to adjust. 20. VIDEO: Selects individual video settings to adjust. 4. TV Operation and Features Remote Control, continued 21. MENU: Displays the main TV menu. When a submenu is open, backs up one menu level. 22. EXIT: Closes TV on-screen menus/displays. 23. F1–F4 For devices under NetCommand control: Perform NetCommand “Learning” to assign your choice of functions to the F1–F4 keys. For devices operating independently of NetCommand: The F1–F4 keys work like the A, B, C, D buttons on some cable boxes, satellite receivers, and DVD players. Program the remote control for your equipment and test the keys. See Appendix C, “Programming the Remote Control.” 25. (PAUSE): Freezes a broadcast TV picture from an antenna source, cable box, or satellite receiver (if key has not been reassigned for NetCommand use). Record/Playback Keys Use any of these methods to enable the recording and playback commands of the TV’s remote control: • Program the remote control for your DVR, VCR, or DVD player/recorder and set the slide switch to VCR, DVD, CABLE/SAT, or AUDIO as appropriate. • Check HDMI devices for compatibility with the TV’s NetCommand for HDMI feature (see Appendix E). • 736 or 835 Series TV: Perform NetCommand IR “learning” for the device. 24. (RECORD): Records with a VCR or DVR. 25. (PAUSE): Pauses a VCR, DVR, or DVD. See above for use during TV viewing. 26. (STOP): Stops play of a VCR, DVR, or DVD. 27. (REVERSE): Rewinds a VCR. Reverse scans a DVR or DVD. 28. (PLAY): Plays a VCR, DVR, or DVD. (FORWARD): Fast forwards ...