Stimmen - 3, Durchschnittliche Bewertung: 5 ( )

Hersteller: Apex Digital Dateigröße: 302.83 kb Dateiname: f554ab3c-91c7-4c61-8f6c-e1508e322be0.pdf Unterrichtssprache:

A channel number will appear on the upper right corner of screen. Also, the red indicator light on the TV will come on. 2. Standby (Soft Off) With the main power ON, press the Standby button on the remote control. This will put the TV in .Standby. or soft off mode. The red indicator light on TV set will NOT turn off. To turn the TV on again, simply press the Standby button on the remote control, or press one of the CH +/ - buttons on the TV set. 3. Power Off With the power ON or in Standby mode, press the MAIN POWER SWITCH on the front of the TV set to completely turn off the power to the TV set. The red indicator light on the front of the TV set will turn off. 4. Auto Off If the TV is ON (not Standby mode), and there is no signal is coming into the TV set for 15 minutes, the TV will turn off. Note: Avoid switching the TV on and off frequently or rapidly. Doing so may shorten the life span of internal components. On Screen Display Tuner Mode Pressing the DISPLAY button on the remote control while in Tuner mode will cause the channel number, antenna mode, and clock to appear in the upper right of the screen. To remove, press DISPLAY again. Video Mode Pressing the DISPLAY button on the remote control while in Video Mode will cause the word .Video. and the clock to be displayed. Press DISPLAY again to remove.The word .Video. will continue to be displayed if no video signal is present. Basic Functions Changing the Channel While in Tuner mode, press the CH +/ - key to change the channel, or use the numeric keypad to enter a new channel. For channels over 99, press the 100+ button and then the last two digits of the channel. Adjusting the Volume To adjust the volume, press the VOL +/ - key. Also, you may press the FUNCTION ASSIST key along with the VOL +/ - key to adjust the volume in increments of 4. Muting the Volume To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key. STANDBY FUNCTION CH + / - VOL + / - DISPLAY MUTE 14 Instruction Manual FUNCTIONS & FEATURES (continued) Function Selection Menus All Function menus can be accessed by pressing the .Menu. key on the remote control, or using the .Menu. key on the TV set. When finished, press the .Menu. key until the screen clears. Access From the Main menu screen, press the .Menu. key until .Picture. is highlighted in red. Press the left or right arrow keys to access this menu. Features This menu allows you to adjust the various picture settings. Use the up & down arrow keys to move between the various settings, and the left & right arrow keys to adjust them. When finished, press the .Menu. key to return to the main menu. TINT: -31 (more greenish) to +31 (more purplish) BRIGHTNESS: 0 (dimmest) to 63 (brightest) CONTRAST: 0 (minimum contrast) to 63 (maximum contrast) COLOR: 0 (minimum color) to 63 (maximum color) SHARP: 0 (minimum sharpness) to 63 (maximum sharpness) Picture Menu Tint Brightness Contrast Color Sharp Picture 00 32 32 32 32 Tuner Menu Access Press the .Menu. key until .Tuner. is highlighted in red. Press the left or right arrow key to access this menu. Note: This menu is only accessible while the TV is in Tuner mode. FEATURES Use the up & down arrow keys to move between the various settings. When finished, press the .Menu. key to return to the main menu. Channel: This feature allows you to select the channel being displayed. Either use the left & right arrow keys or the numeric keypad to select the channel. Add/Erase: This feature is used to either add or remove the presently selected channel from the active channel list, which is used by the TV when CH +/ - is pushed. Use the left & right arrow keys to select ADD or ERASE. Antenna : This feature sets the TV tuner to an Air antenna or a Cable antenna. Please use Air mode when using an over-the-air antenna; use Cable mode for a cable hookup. Use the left & right arrow keys to select between the two options. Auto Program: This feature will automatically add channels to your channel list, based on the presence of a signal. If a signal is detected, that channel will be added. If there is no signal detected then the channel will not be added. Use the right arrow key to start the process; use the left arrow key to stop the process. Tuner Channel 2 Add/Erase Add Antenna Ai r Auto Program 15 Stop Start Standard - AT1302, AT2002, AT2402, AT2702 FUNCTIONS & FEATURES (continued) From the Main Menu screen, press the .Menu. key on the remote control until .Timer. on the main screen is highlighted in red. Press the left or right arrow key to enter this menu. Time This feature allows you to set the clock on the TV. With .Time. highlighted in red, use the left & right arrow keys to set the hour. Once the hour has been set, press the down arrow key to move to minutes, and then set them as well. Repeat this process for the AM/PM aspect also. Please note that on some models, the number .0. is used instead of .12.. Press the down arrow again to move on to the next featur...

Herunterladen

Geben Sie zwei Ziffern: