Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
Select Normal to expand digital video so it includes both the hidden and visible parts of the picture (displays computer images at full size). ¦ Position Image • Position Use the arrow buttons to fine-tune the position of the image on the screen. ¦ Zoom Caption Image • Zoom Caption Lets you adjust the shape and position of the image so that subtitles are visible (available only if the aspect ratio has been set to Zoom). Use Vertical Size to adjust the proportions of the image, and Zoom Position to move the image up or down. ¦ Aspect Image • Aspect This setting lets you change the aspect ratio of your image, and works the same as pressing the Aspect button on the remote control. See page 26 for more information. Making Detailed Adjustments 43 Screen Options ¦ Message Settings • Display • Message Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes). ¦ User’s Logo Settings • User’s Logo Lets you display an image of your choice when the projector is warming up, not receiving a signal, or when you press the Blank button to temporarily stop projection. To capture the image, first set the projector to display the image you want to use. Then select User’s Logo and follow the instructions on the screen. When done, change the Display Background setting to Logo, as described on page 44. Move the frame to select the area you want to record Select the display ratio Record ¦ Startup Screen Settings • Display • Startup Screen Turn this setting off if you want to prevent your logo (see page 44) from appearing while the projector is warming up. ¦ Display Background Settings • Display • Display Background Changes the screen that’s used when the projector is not receiving a signal or when you press the Blank button to temporarily stop projection. Select Blue (instead of Black) or Logo to display your logo on a black background. 44 Making Detailed Adjustments Other Setup Options ¦ Keystone Settings • Keystone Adjusts the shape of the image, if the left and right sides are not parallel after tilting the projector up or down at the screen (see page 25). ¦ Projection Settings • Projection Inverts the image for overhead projection. ¦ Direct Power On Settings • Operation• Direct Power On Sets projection to start when the main power switch is turned on, without pressing the On button on the remote control or the Power button on the projector. Note: When direct power on is enabled, power surges that occur after a power outage can cause the projector to turn on. ¦ Video Signal Settings • Input Signal• Video Signal Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats). ¦ Input A Settings • Input Signal• Input A Change this setting to match the type of equipment connected to the Input A port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment’s signal. ¦ Trigger Out Settings • Operation • Trigger Out Turn on this setting if you want the Trigger out port to output a 12-volt signal while the projector is operating. You can use this to raise or lower your projection screen. Making Detailed Adjustments 45 ¦ Sleep Mode Settings • Operation • Sleep Mode Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.) Select 30 min., 10 min., or 5min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. To turn the projector back on, press the On button on the remote control, or press the Power button on the projector. ¦ Child Lock Settings • Operation • Child Lock Lets you lock the Power button on the projector’s control panel to make it more difficult for a child to turn on the projector. See page 31 for more information. ¦ Operation Lock Settings • Operation • Operation Lock Lets you disable all the buttons on the projector’s control panel to prevent the image from being accidentally changed once it is adjusted. See page 31 for more information. ¦ High Altitude Mode Settings • Operation • High Altitude Mode Adjusts the speed of the fan so it can properly cool the projector at altitudes above 4,900 feet (1500 meters). 46 Making Detailed Adjustments Maintenance Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also need to clean the air filter periodically to prevent overheating. Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this User’s Guide. The only...
Dieses Handbuch ist für folgende Modelle:Fernseher - 400 Series (3.1 mb)