Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Anleitung Zusammenfassung
PowerLite is a registered trademark of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 2003 by Epson America, Inc. Introduction Your EPSON PowerLite 735c projector includes new features for Macintosh® and Windows® user that are not covered in the User’s Guide. The following features are now available: ¦ Presenting through a wireless network from a Macintosh ¦ A new version of NS Connection (for Windows and Macintosh) that supports improved performance in wireless presenting, including the ability to connect to four projectors at once ¦ Support for SXGA+ and UXGA video modes ¦ E-mail notification through the wired or wireless connection when an error occurs on the projector ¦ The ability to play MPEG2 movies and view PNG files from a memory card in the projector This booklet provides instructions for using the new features. Installing and Setting Up Wireless Projecting for Macintosh The EMP NS Connection software is now available for Macintosh. This allows you to project wirelessly from Apple® Macintosh systems equipped with an 802.11b wireless network interface. System Requirements Before you install the software, make sure your Macintosh meets the following requirements: ¦ Power Macintosh® series, iMac,® PowerBook,® or iBook® series system, running Mac OS X 10.2.4 or above ¦ 802.11b wireless network interface (AirPort) ¦ At least 256MB of RAM ¦ At least 128MB of free hard disk space ¦ SVGA (800 . 600) or better display adapter and monitor note If you want to monitor the projector using HP OpenView,™ you can request an SNMP management plug-in from EPSON. Installing the Software Follow these steps: 1. Insert the EasyMP software CD-ROM in your drive. You see a window containing the EMP NS Connection.pkg icon. 2. Double-click the EMP NS Connection.pkg icon. 3. Click Continue. You see the software license agreement. 4. Click Continue, then Agree. 5. Select the destination drive, then click Continue. You see the following install window: 6. Click Install. When installation is complete, close the window. Configuring Your Network Connection Follow the instructions in your Projector User’s Guide to start EasyMP and insert the EPSON 802.11b card in the projector. Determine whether you will use Ad Hoc mode or Access Point mode to connect to the projector. Follow the instructions in your Projector User’s Guide to configure the projector for the mode you will be using. Then follow the instructions beginning on page 5 to set up your Macintosh in either Ad Hoc mode or Access Point mode. Before you can connect to the projector, you need to make sure the network settings on your Macintosh match the settings on the projector. 1. From the Apple pull-down menu, select System Preferences. Then double-click the Network icon. You see the Network Settings window: note EMP NS Connection does not support Macintosh Channel Ad Hoc mode. note Check the port you want to use Make sure that only one port is selected. 2. Under Port Configurations, select AirPort for a wireless network or Built-in Ethernet for a wired network. 3. Click Apply Now. Then close the window. note If you see a message during installation that the EPSON GDI Monitor Driver has not passed Windows Logo testing, click Continue Anyway. ¦ For optimal performance, set your screen resolution to 1024 . 768 or lower with a color depth of Thousands (16 bit). ¦ When making Location settings, you can select the desired location and change all the network settings one at a time. 4. Make sure the following is displayed in the communication status bar in the top right corner of the screen: ¦ If the projector has been assigned an ESSID name, click the communication status icon and select the projector’s ESSID name from the menu. ¦ If you are using the wired LAN Connection mode, click Turn AirPort Off. Using EMP NS Connect for Wireless Projecting Your projector now includes version 1.20 of EMP NS Connection for Windows (equivalent to version 1.0 for Macintosh). If you are using a Macintosh, the screens will look different from those shown in this section, but the same features are available. Follow the instructions in your Projector User’s Guide to install the software, start EasyMP, and set up your projector and computer in either Ad Hoc mode (computer to computer) or Access Point mode. Then follow these steps: 1. Make sure you’ve installed your wireless 802.11b card. Then do one of the following: ¦ Windows: select EMP NS Connection from the Start menu. ¦ Macintosh: double-click the EMP NS Connection icon in your Applications folder. The first time you start NS Connection in Windows, you see a window asking you to select your network. 2. Select the IP address for your computer’s network adapter card and click OK. You see the screen below. (If you have previously started NS Connection, or you’re using a Macintosh, ...
Dieses Handbuch ist für folgende Modelle:Fernseher - PL 735c (2.05 mb)