Stimmen - 3, Durchschnittliche Bewertung: 4.7
(
)
)
|
Anleitung Zusammenfassung
If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. ! . Warning Pyle Audio 1600 63rd st , Brooklyn, NY, 11204 (718)236-8000 Thankyou forchoosingourproductThank you for choosing our product This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children 1.Make sure these instructions are read and completely understood before attempting installation. If you are unsure of any part of this installation, contact a professional installer for assistance. 2.The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; otherwise the structure must be reinforced 3.Safety gear and proper tools must be used. A minimum of two people are required for this installation. Failure to use safety gear can result in property damage, serious injury or death. ! . Warning Pyle Audio 1600 63rd st , Brooklyn, NY, 11204 (718)236-8000 -8 INSTALLATION GUIDE Item ItemItem No.: No.:No.: PSWLE58 PSWLE58PSWLE58 TV Size Range: 23 ~42" " Maximum Weight Capacity: 20kg/44lbs Locking by locking bar on the bottom pyleaudio. com CAUTION This product was designed to be installed on wood stud walls and solid concrete walls. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Never exceed the Maximum Load Capacity. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury. ID Description 1 2 A 4 B 1 1 4 1 4 Wall plate Left bracket M4.12mm bolt M4.16mm bolt Qty Locking bar -2- -7- 1 4 2 3 Description Square washer Long bolt Wall anchor Long bolt washer M6.16mm bolt M5.16mm bolt 5 1 Rotating rod ID Qty 4 4 F G H 4 D 4 E 4 C 4 5 Hardware Kit: A-D E F G H 3 1 Right bracket 0 14 ° ° - Wall Wall TV TV -6- -3- Wood stud F H Part 1a-Wood Stud Mounting . Use wall plate(1) as a template, make sure it is level, and mark four mounting holes along the center lines of the wood studs. Drill four 3/16 ) ) . . ” ” (5mm)dia holes 2 (50mm) deep. Level wall plate(1) and attach to wall with four long bolts(F and four washers(H . Tighten screws firmly Do not overtighten 2 50mm) ”( .3/16 (5mm) ” 2,3 1 Hook the top of brackets onto the top flange of wall plate(1). Then swing the screen down. (2,3) Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment. Part 3-Mounting the flat panel screen NOTE: Use the Locking bar(4) to prevent the TV from being removed or accidentally knocked off of the wall plate.When the locking bar half insertes into the wall plate , you can use the rotating rod(5) to make it fully inserted. Stud finder 4 5 -4- -5- ConcreteWall Mounting . Level wall plate(1) and use wall as a template to mark four holes. Drill four 3/8 (10mm) dia. holes 2 (50mm) deep. Insert four anchors(G) into holes and secure wall plate with four long bolts(F) and four washers(H).Tighten screws firmly. Do not overtighten ” ” Part 1b-Concrete Wall ConcreteWall 2 ( ” 50mm) .3/8 (10mm) ” . Brackets Center brackets vertically on back of screen. Select the small(A or B) medium(C ) screw. Attach brackets to screen using four selected screws and four square washers(E) at the top and bottom of each bracket. or or D Tighten screws firmly. Do not overtighten Part 2-Attaching To Screen F H G Square washer(E) Small hole for M4 screws Medium hole for M5 and M6 screws E A-D ...