Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
A new menu appears. Automatic search begins. The cursor moves from left to right on the VL line, then on the VH line and then on the U line. The channels found are stored in memory in order starting from programme PR 01. You can stop the automatic search at any time by pressing the button. The search stops automatically at the end of the U band or when 99 channels have been found. PR01 AUTO INSTALL. VL EURO The Programme Organizer menu then appears automatically. The channel stored on programme PR 01 is selected (see next page). 5 Changing a Programme Number Select the channel number to be changed using the button. Using the numerical keypad on the remote control, enter the new programme number. GB You can also use the buttons on the remote control. PR01 AUTO INSTALL. VL EURO Press the button to confirm the change. The programmes stored under the old and new numbers are then swapped. Repeat this operation to change other programme numbers. Erasing a Programme Select the programme to be erased using the button. Enter 0 or 00 on the numerical keypad of the remote control. Press to confirm. The programme is erased. Check that all the programmes are in the required order using the button, then press to leave the menu. 6 GB Manual Channel Setting Press the button twice to call up the channel setting menu. 1. Channel Search Select the 2nd line of the menu using the button. Start the search by pressing: – the button for a forward search, – the button for a backward search. Thesearchful llycoverstheVL,VHandUbandsstarting fromthechannelonthescreen.Thecursormovesand assoonasachannelisfound,thepictureappearson thescreen. VL PR EURO Waitforthemenutogotothebottomofthescreenforoptimumreception. Ifthepicturecorrespondstothechannelrequired,gotothe4thline(PR),otherwise continuethesearch. If you wish to stop the automatic search, press the button. 2. Programme Number and Storing in Memory Select the 4th line of the menu using the button. Iffinetuningisnecessary,see FineTuning Enter a programme number using the numerical buttons of the remote control. VL PR EURO Youcanalsousethe buttons. Store the programme number you have allocated to the channel by pressing the button. The2ndlineofthemenuisthenselectedagain. Restartthesearchusing the buttons. 7 3. Fine Tuning Onlynecessaryintheeventofinterference If fine tuning is necessary, select the 3rd line of the menu using the button. If necessary, adjust the picture using the buttons. VL PR EURO GB Select the 4th line (PR)using the button to allocate a programme number to the channel and store it in memory (see Programme Number and Storing in Memory) Ifa channel has required fine tuning, itwil ll be stored in memory with the AFC(Automatic FrequencyControl)deactivated. Press the button to leave the menu. 8 Picture Adjustments Press the button to call up the Picture Menu. = == == BRIGHTNESS COLOUR CONTRAST SHARPNESS TINT GB Select the function to be adjusted using the buttons. The tint function is only active in NTSC mode. Adjust as required using the buttons. Storing Personal Adjustments You can store the adjustments you have just made and call them up at a later stage. Caution: these personal adjustments will replace and delete the standard settings made at the factory. With the Picture Menu displayed, press the red button. Press the button to leave the menu. Sleep Timer Press the green button to call up the Stand–by Menu. Set the stand–by time in 10–minute steps (up to 4 hours) using the buttons Press the button to leave the menu The television set is child locked when the programmed time period has elapsed. The stand–by indicator will flash (see Day to Day Operation). : To cancel the sleep time function: –press thegreen button to call up the menu. –press the button once or several times to return to: –:–– When the display indicates –:––, the sleep timer function is deactivated. The sleep timer function is also deactivated when the television set is switched to stand–by from themainON/OFFswitch. The television is then child locked and the stand–by indicator flashes (see Day to Day Operation). 9 Day to Day Operation Switching On -Selecting Programmes Switch on the television set using the main ON/OFF switch if the indicator is off. If it is on, enter the desired programme number. For programmes 1 to 9: Press the corresponding number on the remote control. GB For programmes 10 to 99 (e.g. 24) : Press and hold the decimal (tens) number (2): 2then press the units (4) number briefly: 24 Volume Adjustment -Sound Mute Press the buttons to turn the sound up or down. Press the button to turn the sound off. The sound returns if the button is pressed again. Zapping Press the buttons to scroll through the programmes stored in memory. Personal Adjustments Press the red button to call up your personal adjustments (See Picture Adjustments). Display Press the yellow button to display the programme number and stand–by time (if sleep timer command is activated). If the channel has been fine tuned, th...
Dieses Handbuch ist für folgende Modelle:Fernseher - 14MG10G (457.1 kb)