Stimmen - 4, Durchschnittliche Bewertung: 3.3
(
)
)
|
Anleitung Zusammenfassung
NOTICE: A NOTICE indicates either potential damage to hardware and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. _____________________ Information in this document is subject to change without notice. © 2005 Dell Inc. All rights reserved. Reproduction of this document in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. Trademarks used in this text: Dell, the DELL logo; TruSurround XT, SRS, and symbol are trademarks of SRS Labs, Inc. Dell, Dimension, OptiPlex, Dell Precision, Latitude, Inspiron, DellNet, PowerApp, PowerEdge, PowerConnect, PowerVault, and EMC3 are trademarks of Dell Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. December 2005 Rev. A01 Index 63 About Your TV Front View 612345 Left View Rear View 124121314151617185678910113Connectors are here Package Contents NOTE: If you need additional cables, contact Dell. Caring for Your TV CAUTION: Only a licensed technician should service the TV. Do not disassemble the TV. Before cleaning the TV, unplug it from the electrical outlet Setting Up Your TV CAUTION: Before you begin any of the setup procedures in this section, follow the safety instructions in the Product Information Guide. Proper Location for Your TV Consider the following environmental factors when you are deciding where to put your TV: Connecting Your TV The tables below provide a description of the connectors on your TV to help you decide which connectors to use for your various video devices. Using the ATSC or NTSC Connector (Coaxial) Using the Composite Connector NOTE: If you are connecting a device that you want to be able to remove, such as a video game system or a camcorder, use the composite connector on the right side of the TV (see "Left View" on page 6). Using the S-Video Connector NOTE: If you are connecting a device that you want to be able to remove, such as a video game system, or a camera, use the S-Video connector on the right side of the TV (see "Left View" on page 6). Using the Component Connector Using the HDMI Connector Using the VGA Connector NOTE: Suggest to use a VGA cable which has a ferrite core. Using the Subwoofer Connector Using the Composite Video and Audio Out Connectors Using the Optical Digital Out (SPDIF) Connector Using the Coaxial Digital Audio Out Connector Connecting the Speakers 123 Use a screwdriver to ensure all screws are completely tightened. Installing the RCA-Phono Cable With Ferrite Core for your TV NOTE: DVI to HDMI cable/ dongle and RCA-phono cable are not included with your TV. Your Remote Control Installing Batteries Before you can use your remote control, install three AAA batteries in the remote control as follows. Using Your Remote Control NOTE: Content may vary depending on the broadcaster. Using Your TV With a Universal or Learning Remote Control Preprogrammed universal remote controls can be programmed to control the following functions on your Dell TV: NOTE: Future preprogrammed universal remote controls may be able to control more functions. You can program universal remote controls to work with your Dell TV in the following ways: NOTE: See the remote control documentation for specific instructions for your universal or learning remote control. Using the TV Menu Your TV has a TV Menu that allows you to select the proper input source, make adjustments to the image and audio settings, select to view Picture-In-Picture, Picture-Outside-Picture, and Picture- By-Picture, and set parental controls. Using Your Remote Control With the TV Menu NOTE: You can access and make selections to the TV Menu using the volume and channel buttons on the side panel of the TV or you can use the remote control. Except where noted, this section describes how to use the TV Menu with the remote control. NOTE: A red arrow appears next to the setting as you navigate through the options. A check mark appears next to the option that you have selected. NOTE: You can select EXIT or press the MENU button at any time to return to the main menu. Selecting Your TV Menu Language Input Select The Input Select menu allows you to select the proper source based on how you have your TV and video equipment connected. Press INPUT on the remote to go directly to the Input Select menu. You can also press MENU on the remote and select INPUT SELECT from the main menu. If you are using the TV (NTSC connector) or the Digital TV (ATSC connector) input source, you can preset the viewable channels. Go to the Main Menu, select SETUP, select CHANNEL SETUP, and then select CHANNEL SEARCH. If you are using the NTSC connector and the ATSC connector at the same time, you need to preset the viewable ...