Stimmen - 1, Durchschnittliche Bewertung: 3
(
)
)
|
Anleitung Zusammenfassung
Once you are satisfied with your selection, push the OK button (A18) to confirm your choice, after which the menu will disappear. The menu will never appear again. VCR / DVD / Video Game / Pay-TV decoder This socket (C1) has video / audio inputs and outputs. It is recommended to connect to this socket automatic AV switching equipment such as pay-TV decoders, video games, DVD players and most VCR’s. In most cases, when connecting powered equipment to this socket, the TV set switches automatically to AV mode. If not, then use the TV/AV buttons (A5) or(B4) to select AV1. This socket (C2) has video / audio inputs and outputs. Automatic AV switching equipment (for example most VCR’s) can be connected to this socket. In most cases, when connecting powered equipment to this socket, the TV set switches automatically to AV mode. If not, then use the TV/AV buttons (A5) or (B4) to select AV2. You can also receive an S-VHS signal with REAR SCART2 socket, by selecting SVHS2 with the TV / AV buttons (A5) or (B4). REAR SCART 1 SOCKET (AV1) SIDE S-VIDEO JACK REAR SCART 2 SOCKET (AV2) The side S-VIDEO jack (B9) has video inputs only. It is necessary to connect the audio inputs to socket (B8) in order to have audio and video. To switch from TV to these inputs, use the TV / AV buttons (A5) or (B4) and select SVHS3. Allows to switch between TV and external modes. By repeatedly pressing the remote control TV / AV (A5) or the TV front panel TV / AV (B4) button, the onscreen display is changed as shown AV1 > AV2 > SVHS2 > AV3 > SVHS3 > TV SIDE AV SOCKET (AV3) The side AV socket (B7) - (B8) has audio and video inputs. To switch from TV to these inputs, use the TV / AV buttons (A5) or (B4) and select AV3. To hear TV sound with headphones, insert a 3.5mm headphone plug into the headphone socket (B10). The speaker’s sound will be automatically cut off. HEADPHONE SOCKET The rear Scart 1 (C1), Scart 2 (C2) sockets and the side AV socket (B7) (B8) are three dedicated sockets to connect audio-video equipment. TV/AV SELECTION PR PR MENU LANGUAGE CZ D DK E F FIN GB GR H I N NL PL RO RUS S SK 5 Important: If your video equipment does not have SCART socket(s), or if you wish to use only the aerial (RF) connection (not recommended), then you should make use of PR 00 on the TV set for best performance. ANT IN ANT IN SWITCHING ON TV SET SWITCHING OFF TV SET DAILY USE 1) If stand-by indicator (B5) is red, then the TV set is in stand-by mode. You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons (B2) can also be used. Once on, the stand-by indicator turns to green and the picture appears on the screen. 2) If stand-by indicator (B5) is not lit, then the TV set is powered off. You must press the TV set front panel MAIN POWER button (B1). If a picture does not appear, then the stand-by indicator will be red. In this case, use the remote control as indicated in 1). 3) If stand-by indicator (B5) is flashing red, and green then the TV set is in child-lock mode. It is necessary to use the remote control POWER button (A1), NUMBER 0….9 buttons (A3), or PROGRAM UP (A6) / DOWN (A21) buttons. The front panel PROGRAM UP/DOWN buttons (B2) will not function. Once on, the stand-by indicator turns to green and the picture appears on the screen. 1) By pressing the remote control POWER button (A1) ,you can switch off to stand-by mode (low power consumption mode) which also allows quick restart by remote control (see above: SWITCHING ON TV SET). 2) Pressing the TV set front panel MAIN POWER button (B1), you can completely power off the TV set. In this case, you must use the same front panel POWER button (B1) to switch on again (see above: SWITCHING ON TV SET). Remark: If a broadcast signal is not present after 30 minutes, the TV set will be automatically turned to stand-by mode. PR PR MENU SOUND CONTROL Volume adjustment Use the remote control VOLUME UP (A20) / DOWN (A7) buttons or the TV set front panel VOLUME UP / DOWN buttons (B3). Mono forcing, dual language - If you are unable to get good sound quality for a program due to poor reception, you can force a change from stereo to mono transmission by pressing the remote control MODE button (A14). Then the program status display indicates "MONO" (in red). - On the other hand, during a program with dual language transmission, the MODE button (A14) allows you to toggle between the first and second language. The program status display will indicate "DUAL 1" or "DUAL 2" (plus NICAM according to the received signal). - To return to initial state, press again the MODE button (A14). Sound effects A SPATIAL sound effect is available, using the remote control 3D (A13) button. The following display appears: To return to initial sound effect, press again the 3D (A13) button. The following display appears: As an option, the sound effects PANORAMA, and VIRTUAL DOLBY are available with the same button. For other ...