Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Ativa, modell 061506-5OD

Hersteller: Ativa
Dateigröße: 176.62 kb
Dateiname: 564-485_DMC120D_LCD_manual.pdf

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Two seconds after the characters are shown, the display clears and enters the standby mode. ON Mode When pressing the ON/OFF button for more that three seconds, the LCD shows AUTO and enters AUTO mode. In the AUTO shredding mode, the shredder stands ready to shred paper, If there is any paper stuck at the throat in the shredder, the shredder will automatically shred the paper. The shredder will stop after the paper is completely shredded. OFF Mode When pressing the ON/OFF button for more that three seconds, the shredder will beep once and shut off all functions, entering into standby mode, the LCD will turn off. If you wish to restart, press and hold ON/OFF button for more than three seconds to start. REVERSE Mode When pressing the REVERSE button, LCD shows the character of REVERSE and the motor enters the REVERSE mode. Press and hold the REVERSE button in order to keep the motor running in reverse. When the REVERSE button is released, the motor will stop. If there is any paper left at the throat, the shredder will enter into the AUTO shredding mode and the display will show AUTO. REVERSE Mode, when shredding in AUTO mode During forward shredding, if the REVERSE button is pressed, the motor will stop immediately. After three seconds, the motor starts reversing while the LCD shows REVERSE. Pressing the REVERSE button will keep the motor running. The shredder will not stop until the button is released. After the motor stops, if there is still paper remaining in the throat, the shredder will resume AUTO shredding and the LCD will display AUTO. 2 061506_OD LCD Manual 6/15/06 4:57 PM Page 3 FORWARD Mode When pressing the FORWARD button, the LCD displays AUTO and the motor enters the FORWARD mode. Press and hold the FORWARD button in order to keep the motor running forward. When the FORWARD button is released, the motor will stop. OVERLOAD Mode When the shredder overloads during shredding, the motor will stop running and the LCD will flash the OVERLOAD icon. Press the REVERSE button the motor will start reversing and the LCD will show REVERSE. When the overloaded paper is removed from the throat, the LCD will show OVERLOAD, the motor will start running for three seconds and the shredder will start automatically clearing any papers. After the motor stops, the LCD will show AUTO. If user cannot remove the paper from the throat by pressing the REVERSE button, tear off the remaining paper and press ON/OFF to shut off the shredder. Press ON/OFF again to start shredding and clean out the paper. If unable to clean out the paper in one action, repeat the above process until the paper is completely removed and the LCD displays AUTO. ON/OFFMaintainReverseForwardON/OFFMaintainReverseForwardON/OFFMaintainReverseForward DOOR OPEN Mode When the paper bin is pulled out or the bin door is opened while shredding, the motor will stop immediately and sound the alarm. The LCD will flash DOOR OPEN. To resume normal function, the bin or door must be placed back to original position. The LCD will show AUTO. 3 061506_OD LCD Manual 6/15/06 4:57 PM Page 4 OVERHEAT Mode If the shredder overheats, the LCD will flash OVERHEAT. Both AUTO and REVERSE functions will stop. When the shredder overheats, user may press ON/OFF to place the shredder in stand by mode. The shredder will not resume normal functioning until the temperature of the motor cools down to a safe temperature and LCD shows AUTO. MAINTAINENCE After 500 shredding cycles, the LCD will flash MAINTAIN. This indicates ...