Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Sony Dateigröße: 2.29 mb Dateiname: 409022801X.pdf Unterrichtssprache:

Connect your existing aerial lead to the digital socket marked on the rear of the TV as shown. 2. Connect the supplied RF loopthrough cable from the socket marked to the analogue socket marked . 1. Connect your existing aerial lead to the digital socket marked on the rear of the TV as shown. 2. Connect the supplied RF loopthrough cable from the lower socket marked on the TV to the RF IN socket on your VCR. 3. Connect a lead from the RF OUT socket of your VCR to the analogue socket marked on the TV. 4. Connect a scart lead from the socket marked on the rear of the TV to the scart socket on your VCR ( refer to your VCR instruction manual) . 5. Connect the VCR to the mains socket and switch on. 6. Insert a pre- recorded tape into the VCR and press the ‘ PLAY’ button. This enables the TV to locate and store the video channel during the ‘ Automatically tuning the TV’ procedure. s 33 VCR GUIDE 0 4 6 7 8 9 1 2 3 5 DIGITAL MEMORY STICK MODE INDEX PROG MENU VIDEO TV / / VTR TV DVD 2 3 1 4 7 3 6 9 2 5 8 0 OK PROG DIGITAL VTR TV DVD 4 Switching on the TV 5 Automatically tuning the TV When you first switch on your new TV you need to tune in all the available channels. The ‘ Auto Tune’ feature automatically searches for and stores all the available channels for you. The following instructions and illustrations guide you through this procedure. 1. Connect the TV plug to your mains socket and switch on. Note: If the red indicator on the front of the TV is lit the TV is in standby mode. Press the TV button on the remote control to switch on the TV. Please be patient as the picture may take a few moments to appear on screen. 1. Push in the on/off button ( labelled ) on the front of the TV. / Switching between digital and analogue mode Finding your video channels If you connected a VCR to your TV when following the ‘ Connecting the TV’ instructions, you now need to find your video channel. 1. When you switch on the TV for the first time, the Sony logo appears on the TV screen followed by the ‘ Memory Stick’ logo, then the Language/ Country menu with the word ‘ English’ highlighted. Press the Vor v buttons on the remote control to highlight your required language. Press the OK button to confirm your choice. From now on all menus appear in your chosen language. 2. The word Country is now highlighted. Press the V or vbuttons to highlight the country in which you are using the TV. Press the OK button to confirm your choice. Note: The digital features of this set are designed for use in Great Britain only. The picture rotation prompt appears. Sometimes the Earth’s natural magnetism can cause the screen to look tilted. a) If no correction is required, press the B button. b) If some correction is required, press the OK button. Press the V or vbutton to rotate the picture over a range of - 5 to +5. Press the OK button to store. The autotune prompt screen appears. Press the OK button to select Yes...

Herunterladen

Geben Sie zwei Ziffern: