Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Sony Dateigröße: 706.34 kb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  KDL-32S5650

• This TV’s PC input does not support interlaced signals. • This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. PC Input Signal Reference Chart for HDMI IN 1, 2 and 3 Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA WXGA 1280 768 47.8 60 VESA WXGA 1360 768 47.7 60 VESA SXGA 1280 1024 64 60 VESA 34 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. Press 1 on the side of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre. If the red LED flashes 19 times, please switch off the set and remove the faulty USB device. If the red LED flashes 20 times, please switch off the set and remove the faulty CAM device. When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel. Picture * Except for KDL-40/37/32P36xx. No picture (screen is dark) and no sound • Check the aerial/cable* connection. • Connect the TV to the mains, and press 1 on the side of the TV. •If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information fromequipment connected to the scart connector • Press to display the connected equipment list, then select the desired input. • Check the connection between the optional equipment and the TV. Double images or ghosting • Check the aerial/cable* connection. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Picture or sound noise when viewing a TVchannel • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 26). Some tiny black points and/or bright pointsappear on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes • Select “Reset” (page 23). No colour or irregular colour when viewing a signal from the COMPONENT IN sockets • Check the connection of the COMPONENT IN sockets and check if each sockets are firmly seated in their respective sockets. Sound No sound, but good picture • Press 2 + or % (Mute). • Check if the “Speaker” is set to “TV Speaker” (page 23). • When using HDMI input with Super Audio CD or DVD- Audio, DIGITAL AUDIO OUT (OPTICAL) may not output audio signals. Channels The desired channel cannot be selected • Switch between digital and analogue mode and select the desired digital/analogue channel. Some channels are blank • Scrambled/Subscription only channel. Subscribe to the pay TV service. • Channel is used only for data (no picture or sound). • Contact the broadcaster for transmission details. Digital channels are not displayed • Contact a local installer to find out if digital transmissions are provided in your area. • Upgrade to a higher gain aerial. General The TV turns off automatically (the TV enters standby mode) • Check if the “Sleep Timer” (page 24) or “Idle TV Standby” (page 24) is activated. • If no signal is received and no operation is performed in the TV mode for 15 minutes, the TV automatically switches to standby mode. Distorted picture and/or sound • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial/cable connection. • Keep the aerial/cable TV cable away from other connecting cables. The remote does not function • Replace the batteries. HDMI equipment does not appear on “HDMI Device List” • Check that your equipment is compatible with control for HDMI. If “Store Display Mode: On” is displayed on the screen • Your TV is set to “Shop” mode. You need to set “Home” for “Location” in the “Auto Start-up” procedure again (page 7). Not all channels are tuned • Check support web site for cable provide information. Additional 35 GB d ending in 2012, television services in the UK will go completely digital, TV region by TV region. Please see overleaf to find out when your area switches to digital. Digital UK is the independent, non-profit organisation leading the process of digital TV switchover in the UK. Digital UK provides impartial information on what people need to do to prepare for the move to digital, and when they need to do it. How the switchover affects your TV equipment: Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by simply plugging it into your aerial socket (check if you can get digital TV ...

Herunterladen

Geben Sie zwei Ziffern: