Stimmen - 4, Durchschnittliche Bewertung: 3.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Press or to select the channel and then, press again the OK button to watch the selected channel. Selecting Screen format Press to view programmes in 16:9 mode. Press again to return to 4:3 mode. GB Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to "“Teletext” section of this instruction manual. 5 Overview Overview of TV Buttons Auto Start Volume Programme Up or Down Buttons (Select Up Button control TV channels) buttons On/Off switch Standby indicator Selecting Input source Press on the mark on the front of the TV to reveal the front connectors. Video Audio Headphone Input jack Input jack jack Inserting Batteries into the Remote Control Make sure to insert the supplied batteries using the correct polarities. Always remember you dispose of used batteries in an environmental friendly way. Overview-Installation Connecting an Indoor Aerial (only for KV-14LT1U) For a better reception we recommend you connect an external aerial. However, where an external aerial is not available and your local UHF signal is strong you can connect the supplied loop aerial as follows: 1 Insert the loop aerial into the opening on top of the set until it clicks. 2 Connect the aerial connector to the aerial socket on the rear of the set. 3 After turning on the TV, adjust the aerial for optimum reception. GB Connecting an Outdoor Aerial and VCR Connecting cables are not supplied or VCR OUT IN For more details of VCR connection, please refer Scart lead is optional. to the section “Connecting Optional Equipment” of this instruction manual. 7 Installation Switching On the TV and Automatically Tuning The first time you switch on your TV, a sequence of menu screen appear on the TV enabling you to: 1) choose the language of the menu screen, 2) search and store all available channels (TV Broadcast) and 3) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change or repeat the tuning (e.g. when you move house) or rearrange again the order of the channels afterwards, you can do that by selecting the appropriate menu in the (Set Up). For more information, refer to the “Menu Guide” section of this instruction manual. You can also do that by pressing the Auto Start Up Button on the TV set. 1 Connect the TV plug to the mains socket (220-240V AC, 50Hz) The first time the TV set is connected, it is usually turned on. If the TV is off, press the on/off button on the TV set to turn on the TV. The first time you press this button, a Language menu displays automatically on the TV screen. 2 Press the or button on the remote control to select the language, then press the OK button to confirm your selection. From now on all the menus will appear in the selected language. 3 The Auto Tuning menu appears on the screen. Press the OK button to select Yes. Language English Espanol Francais Italiano Magyar Nederlands Select Language: Do you want to start automatic tuning? Yes No OK K OK K 4 A new menu appears on the screen asking you to check that the aerial is connected. Ensure the aerial is connected and then press the OK button to start the automatic tuning. The TV starts to automatically search and store all available channels (TV Broadcast) for you. This procedure could take some minutes. Please be patient and do not press any buttons, otherwise the automatic tuning will not be completed. Please confirm that aerial is connected Confirm Programme: Channel: Auto Tuning01C21 Searching... OK K continued... First Time Operation After all available channels are captioned and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. a) If you do not wish to change the channel order, go to step 6. b) If you wish to change the channel order: 1 Press the or button to select the programme number with the channel (TV Broadcast) you wish to rearrange, then press the button. 2 Press the or button to select the new programme number position for your selected channel (TV Broadcast), then press . 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. 6 Press the MENU button to remove the menu from the screen. Your TV is now ready for use OK OK Programme Sorting Programme: 01 TVE 02 TVE2 03 TV3 04 C33 05 C27 06 C58 Select channel: Exit: MENU Programme Sorting Programme: 01 TVE 02 TVE2 03 TV3 04 C33 05 C27 06 C58 05 C27 Select new position: Exit: MENU K K MENUMENU GB First Time Operation 9 Introducing and Using the Menu System Your TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: 1 Press the MENU button to switch the first level menu on. MENU 2 • To highlight the desired menu or option, press or . • To enter to the selected menu or option, press . • To return to the last menu or option, press . • To alter...
Dieses Handbuch ist für folgende Modelle:Fernseher - KV-14LT1U (2.61 mb)