Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Sony Dateigröße: 5.96 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  KDL-32V4200

/ / AV2 (SMARTLINK) 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, selectable audio/video output, and SMARTLINK interface. AV3 Video input (phono jack) AV3 Audio input (phono jacks) Audio output (Left/Right) (phono jacks) HDMI IN 1, 2, 3 Video: 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits PC (see table) Analogue audio (minijack): 500 mVrms, Impedance 47 kilohms (HDMI IN 3 only) COMPONENT IN Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms Audio input (phono jacks) 500 mVrms Impedance: 47 kilo ohms PC PC Input (15 Dsub) (see page 16) G: 0.7 Vp-p, 75 ohms, non Sync on Green B: 0.7 Vp-p, 75 ohms, non Sync on Green R: 0.7 Vp-p, 75 ohms, non Sync on Green HD: 1-5 Vp-p VD: 1-5 Vp-p PC audio input (minijack) i Headphones jack CAM (Conditional Access Module) slot 28 GB Sound Output 10 W + 10 W (RMS) Optional Accessories -KDL-37S40xx/ KDL-32S40xx/ KDL-37U40xx/ KDL-32U40xx/ KDL-37V40xx/ KDL-37V42xx/ KDL-32V40xx/ KDL-32V42xx: Wall-Mount Bracket SU-WL500 -KDL-26S40xx/ KDL-26U40xx/ KDL-26V40xx/ KDL-26V42xx: Wall-Mount Bracket SU-WL100 PC Input Signal Reference Chart for PC -KDL-37S40xx/ KDL-32S40xx/ KDL-37U40xx/ KDL-32U40xx/ KDL-37V40xx/ KDL-37V42xx/ KDL-32V40xx/ KDL-32V42xx: TV stand SU-FL300M Design and specifications are subject to change without notice. Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA 1280 768 47.8 60 VESA • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • This TV’s PC input supports signals in the above chart with a 60 Hz vertical frequency. For other signals, you will see the message “NO SYNC”. PC Input Signal Reference Chart for HDMI IN 1, 2, 3 Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA SVGA 800 600 37.9 60 VESA Guidelines XGA 1024 768 48.4 60 VESA Guidelines WXGA 1280 768 47.4 60 VESA WXGA 1280 768 47.8 60 VESA WXGA 1360 768 47.7 60 VESA Additional 29 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1 Count how many 1 (standby) indicator flashes between each two second break. For example, the indicator flashes three times, then there is a two second break, followed by another three flashes, etc. 2 Press 1 on the top edge of the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel. Picture No picture (screen is dark) and no sound • Check the aerial/cable connection. • Connect the TV to the mains, and press 1 on the top edge of the TV. • If the 1 (standby) indicator lights up in red, press "/1. No picture or no menu information from equipment connected to the scart connector •Press / to display the connected equipment list, then select the desired input. • Check the connection between the optional equipment and the TV. Double images or ghosting (only in analogue mode) • Check the aerial/cable connection. • Check the aerial location and direction. Only snow and noise appear on the screen (only in analogue mode) • Check if the aerial is broken or bent. • Check if the aerial has reached the end of its serviceable life (three to five years in normal use, one to two years at the seaside). Picture or sound noise when viewing a TV channel (only in analogue mode) • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture reception (page 25). Some tiny black points and/or bright points appear on the screen • The picture of a display unit is composed of pixels. Tiny black points and/or bright points (pixels) on the screen do not indicate a malfunction. No colour on programmes • Select “Reset” (page 20). No colour or irregular colour when viewing a signal from the / COMPONENT IN sockets • Check the connection of the / COMPONENT IN sockets and check if each sockets are firmly seated in their respective sockets. Picture freezes or contains blocks on the screen • Check signal level (page 27). If signal bar is red (no signal) or amber (low signal), check the aerial/ cable connection. 30 GB • Remove the connected USB device. It can be damaged or not supported by the TV. Check the website below for updated information about compatible USB devices: Sound No sound, but good picture • Press 2 +/– or % (Mute). • Check if the “Speaker” is set to “TV Speaker” (page 21). Channels The desired channel cannot be selected • ...

Herunterladen

Geben Sie zwei Ziffern: