Stimmen - 3, Durchschnittliche Bewertung: 3.7
(
)
)
|
Anleitung Zusammenfassung
If no channels were found during the auto tune process, a message appears automatically on the screen asking you to connect the aerial. Check the aerial connection (refer to page 7). Press the OK button to restart the auto tuning process. Auto Tuning Programmes found: 4 GB No channel found. Please connect aerial Confirm 7 After all available channels are captured and stored, the Programme Sorting menu automatically appears on the screen enabling you to change the order in which the channels are stored. a) If you wish to keep the broadcast channels in the tuned order, go to step 8. b) If you wish to store the channels in a different order: 1 Press the v or V button to select the programme number with the channel (TV Broadcast) you wish to move. Press the b button. 2 Press the v or V button to select the new programme number position for your selected channel (TV Broadcast). Press the OK button to store. 3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels. Programme Sorting 01 02 03 04 05 06 07 08 TVE TVE2 TV3 C33 C27 C58 S02 S06 Programme Sorting 01 TVE 01 02 03 04 05 06 07 08 TVE TVE2 TV3 C33 C27 C58 S02 S06 8 Press the MENU button to remove the menu from the screen Your TV is now ready for use First Time Operation 9 Introducing and Using the Menu System Your TV uses an On-Screen menu system to guide you through the operations. Use the following buttons on the Remote Control to operate the menu system: MENU 1 To switch on the menu screens: Press the MENU button to switch the first level menu on. Picture Adjustment Select: Enter: OK Exit: MENU Picture Mode: Live Contrast: Reset Noise Reduction: Auto Colour Tone: Cool Picture Adjustment Select: Enter: OK Exit: MENU Picture Mode: Live Contrast: Reset Noise Reduction: Auto Colour Tone: Cool OK 2 To navigate through the menus: • To highlight and select the desired menu or option, press v or V. • To enter the selected menu or option, press OK or b. • To return to the last menu or option, press OK or B. • To alter the settings of your selected option, press v/V/B or b. • To confirm and store your selection, press OK. MENU 3 To switch off the menu screens: Press the MENU button to remove the menu from the screen. TV Functions The Picture Adjustment Menu MENU Picture Adjustment Select: Enter: OK Exit: MENU Picture Mode: Live Contrast: Reset Noise Reduction: Auto Colour Tone: Cool , Picture Adjustment Select:Back: Enter: OK Picture Mode: Live Contrast: Reset Noise Reduction: Auto Colour Tone: Cool The “Picture Adjustment” menu allows you to alter the picture settings. To do this: Press the MENU button and then press OK to enter this menu. Next press v or V to select the desired option and press OK. Finally read the instructions below on how to operate each option. RM-945 OK MENU Picture Mode This option allows you to customise the Picture Mode based on the programme you are watching. After selecting this option press OK. Next press v or V repeatedly to select: Personal (for individual settings). Live (for live broadcast programmes, DVD and Digital Set Top Box receivers) Movie (for films). Once you have selected your desired option, press OK to store. "Brightness", "Colour" and "Sharpness" level of "Live" and "Movie" mode are fixed in the factory to get the best picture quality. GB Contrast Press B or b to reduce or enhance picture contrast. Next press OK to store. Brightness Press B or b to darken or brighten the picture. Next press OK to store. This option only appears for alteration if "Picture Mode" is set to "Personal". Colour Press B or b to decrease or to increase color intensity. Next press OK to store. This option only appears for alteration if "Picture Mode" is set to "Personal". Hue Press B or b to decrease or to increase the green tones. Next press OK to store. This option only appears for NTSC signal (e.g. USA video tapes). Sharpness Press B or b to soften or to sharpen the picture. Next press OK to store. This option only appears for alteration if "Picture Mode" is set to "Personal". Reset Press OK to reset the picture to the factory preset levels. Noise This option is set to Auto to automatically reduce the snowy picture that may be Reduction visible in the broadcast signal. However, it can be modified by pressing v or V to select Off, Low, Mid or High. Finally press OK to store. Colour Tone This option allows you to alter the tint of the picture. After selecting this option press b. Next press v or V repeatedly to select: Warm (gives the white colours a red tint), Normal (gives the white colours a neutral tint), Cold (gives the white colours a blue tint). Next press OK to store. TV Functions 11 The Sound Adjustment Menu m Picture Adjustment Select: Enter: OK Exit: MENU Picture Mode: Live Contrast: Reset Noise Reduction: Auto Colour Tone: Cool Sound Adjustment Sound Effect: Dolby Virtual Treble: Bass: Balance: Reset Dual Sound: Stereo Auto Volume: Off TV Speakers: On Headphones Set Up Select: Enter: OK Exit: MENU MENU , The ...
Dieses Handbuch ist für folgende Modelle:Fernseher - KV-28FQ86U (3.76 mb)