Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Sony Dateigröße: 6.97 mb Dateiname: Unterrichtssprache:

Press again to restore the sound. Press to switch off Teletext or video input. PAP (Picture And Picture) For more details, please refer to the section "Using PAP (Picture And Picture)". Press to display the Electronic Programme Guide (EPG). Press again to switch off EPG. Press to freeze the picture. Press again to For double-digit programme numbers, e.g. 23, press -/-- first, then the buttons 2 and 3. If you enter an incorrect first digit, this should be corrected by entering another digit (0-9) and then selecting -/-- button again to enter the programme number of your choice. indicator Press again to cancel. at least 5 seconds). cancel. 4 Scroll Up $ Z z manual. VCR on/off Muting the Sound Press to mute TV sound. Selecting TV mode Selecting Teletext Press to switch on Teletext. Displaying EPG Freezing the picture return to the normal picture. Selecting channels Press to select channels. Selecting Sound mode Press repeatedly to change the sound mode. Selecting Picture mode Adjusting TV Volume Press to adjust the volume of the TV. K MENU PROGR Displaying the time Press to switch the time on or off (available only when teletext is broadcast). VCR operation For more details, please refer to the section "Remote Control of other Sony Equipment". To Temporarily Switch Off Press to temporarily switch off TV (the standby on the set lights up in red). Pressagain to switch on TV from standby mode. GB After 15-30 minutes without a signal and without any button being pressed, the set switches automatically into standby mode. Displaying On Screen Information Press to display all on-screen indications. Selecting Input source Press repeatedly until the desired input symbol of the source appears on the screen. Back to the channel last watched Press to watch the last channel selected (watched for Selecting Screen format Press repeteadly to change the format of the screen (for more details, please refer to the section “Changing the Screen format”). Displaying Multi PIP (Picture In Picture) Press to display Multi PIP mode. Press again to Joystick for menu selection • When MENU is switched on: Scroll Down Previous menu or selection Next menu or selection OK Confirms your selection • When MENU is switched off: Z Return to the last menu screen. OK Shows a channel overview Selecting channels Press to select the next or previous channel. Displaying the menu system Press to display the menu on the screen. Press again to remove the menu display from the screen. S Press repeatedly to change the picture mode. Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details, please refer to the "Teletext" section of this instruction manual. Overview Installation Make sure you insert the batteries using the correct polarities. Always remember to dispose of used batteries in an environmental friendly way. Inserting Batteries into the Remote Control Connecting the Aerial and VCR Connecting cables are not supplied. or VCR OUT IN The Scart lead is optional. If you use this optional connection it can improve picture and sound quality when using a VCR. If you do not use a SCART lead, after automatically tuning the set refer to the "Manually Tuning the TV" section of this instruction manual, to tune in the set to the output of your VCR. Also refer to your VCR instruction manual to find out how to find the output channel of your VCR. Stabilizing the set the set After setting up, secure the set to a wall, etc., with the supplied brackets, for safety purposes. 1 Mount the two supplied brackets with the screws to the upper rear side of the set. Do not block or cover this ventilation opening. For ventilation, leave a space of at least 10 cm from the wall. 2 Pass a strong cord or a chain through each bracket mounted in 1, and then secure to a wall or a pillar, etc. Installation First Time Operation Switching on the set and Automatically Tuning The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to 1) choose the language of the menu screen, 2) choose the country in which you wish to operate the set, 3) search and store all available channels (TV Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen. However, if you need to change the language menu, change the country, change or repeat the tuning (e.g. when you move house) or rearrange the order of the channels, you can do that by selecting the appropriate menu in the (Set Up). 1 Connect the set plug to the mains socket (220-240V AC, 50 Hz). Press the on/off button on your set to switch on. The first time you press this button the Language/Country menu displays automatically on the screen. Language/Country Language Country Select Language: Confirm: OK 4 Italiano Francais Espanol English Deutsch Dansk Cestina Language/Countr Language Country Select Language: Confirm: OK 4 Italiano Francais Espanol English Deutsch Dansk Cestina continued... Language/Country Language...

Herunterladen

Geben Sie zwei Ziffern: