Stimmen - 6, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Sony Dateigröße: 4.94 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  KDL-40D3550

Display Area Adjusts the screen area for displaying the picture. “Full Pixel”: Displays the picture for 1080i or 1080p (except for component input) sources in the original size when parts of the picture are cut off. “Normal”: Displays the recommended picture area. “-1”/“-2”: Enlarges the picture to hide the edge of the picture. ~ “Full Pixel” is available only when “Screen Format” is set to “Wide”. Horizontal Shift Adjusts the horizontal position of the picture. Vertical Shift Adjusts the vertical position of the picture when “Screen Format” is set to “Smart” (50 Hz), “Zoom” or “14:9”. Vertical Size Adjusts the vertical size of the picture when “Screen Format” is set to “Smart”, “Zoom” or “14:9”. 27 GB Using MENU Functions Set-up menu You can select the options listed below on the “Setup” menu. To select options in “Settings”, refer to “Navigating through menus” (page 22). Auto Start-up Starts the initial set-up to select the language and country/region, and tune in all available digital and analogue channels. Usually, you do not need to do this operation because the language and country/ region will have been selected and channels already tuned when the TV was first installed (page 6). However, this option allows you to repeat the process (e.g. to retune the TV after moving house, or to search for new channels that have been launched by broadcasters). Language Selects the language in which the menus are displayed. Film Mode Provides smoother picture movement when playing DVD or VCR images taken on film, reducing picture blur and graininess. “Auto 1”: Provides smoother picture movement than the original film-based content. Use this setting for standard use. “Auto 2”: Provides the original film-based content as is. “Off”: Turns off the “Film Mode” feature. ~ If the image contains irregular signals or too much noise, “Film Mode” will be automatically turned off even if “Auto 1” or “Auto 2” is selected. Video/Photo Provides suitable image quality by selecting the option depending on the input source (video or photograph data). “Video-A”: Sets suitable image quality, depending on the input source, video data or photograph data when directly connecting Sony HDMI output-capable equipment that supports “Video-A” mode. “Video”: Produces suitable image quality for moving pictures. “Photo”: Produces suitable image quality for still images. ~ • The setting is fixed to “Video” when Video-A mode is not supported on the connected equipment, even if “Video-A” is selected. • “Video/Photo” is available only for HDMI and component input sources (1080p and 1080i). 28 GB AV Set-up AV Preset Assigns a name to any equipment connected to the side and rear sockets. The name will be displayed briefly on the screen when the equipment is selected. You can skip input signals from connected equipment that you do not want displayed on the screen. 1 Press F/f to select the desired input source, then press . 2 Press F/f to select the desired option below, then press . Equipment labels: Uses one of the preset labels to assign a name to connected equipment. “Edit:”: Creates your own label. Follow steps 2 to 4 of “Programme Labels” (page 33). “Skip”: Skips an unnecessary input source. Auto S Video Selects the input signal from S video sockets 6 when / 6 sockets are both connected. AV2 Output Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If you connect a VCR or other recording equipment to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. “TV”: Outputs a broadcast. “AV1”: Outputs signals from equipment connected to the / 1 socket. “AV6”: Outputs signals from equipment connected to the / 6 socket. “Auto”: Outputs whatever is being viewed on the screen (except signals from the / 3, HDMI IN 4, HDMI IN 5 and PC / sockets). Speaker Turns on/off the TV’s internal speakers. “TV Speaker”: The TV speakers are turned on in order to listen to the TV’s sound through the TV speakers. “Audio System”: The TV speakers are turned off in order to listen to the TV’s sound only through your external audio equipment connected to the audio output sockets. When connected with an HDMI control compatible equipment, you can turn the connected equipment on interlocked with the TV. This setting must be made after connecting the equipment. Audio Out “Variable”: The audio output from your audio system can be controlled by the TV’s remote. “Fixed”: The audio output of the TV is fixed. Use your audio receiver’s volume control to adjust the volume (and other audio settings) through your audio system. Colour System Selects the colour system (“Auto”, “PAL”, “SECAM”, “NTSC3.58”, “NTSC4.43” or “PAL60”) according to the input signal from the input source. Using MENU Functions Continued 29 GB HDMI Set-up Timer Settings Power Saving 30 GB This is used to set the HDMI control compatible equipment connected to the HDMI sockets. Note that the interlock setting must also be made on the connected HDMI control...

Herunterladen

Geben Sie zwei Ziffern: