Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Language . Mode Setting . Country . Time Zone . Set Password . Auto Tuning Selects a language to display. Selects Home Use for the home environment. Selects a country to display. (Depending on model) Wall Antenna Socket Selects the time zone and daylight saving. (When Russia is selected for Country) Set the password. (When France is selected for Country) NOTE Scans and saves available programmes automatically. yyFor optimum picture quality, adjust antenna direction. yyIn poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna. yyIf the image quality is poor with an antenna connected, aim the antenna to the correct direction. yyAn antenna cable and converter are not supplied. 19 WATCHING TV ENG ENGLISH Managing programmes NOTE yyFor those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. yyWhen France is selected for Country, password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’, ‘4’. Automatically setting up programme Selecting Antenna, Use this to automatically find and store all available programmes. When you start auto programming, all previously stored service information will be deleted. 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Press the Navigation buttons to scroll to Antenna and press OK. 5 Select Start to start automatic tuning. The TV scans and saves available programmes automatically. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. 4 When the basic settings are complete, press OK. NOTE yyIf you do not complete the Initial setting, it will appear whenever the TV turns on. yyDisconnect the power cord from the power outlet when you do not use the TV for a long period of time. 5 To turn the TV off, press (POWER). NOTE yyIf the TV scans a blocked programme, you will be prompted to enter your password to keep the programme scanned. yyYou can store up to 1,000 programmes. The number of programmes that you can store differs depending on the broadcasting signal environment. yy Automatic Numbering: Decide whether to use the programme numbers as sent by broadcasting stations for tuning. yyWhen select Italy in the Country menu, if the pop up is displayed when the conflicted programme after Auto Tuning, select a broadcaster for conflicting programme number to solve. yyIn the following country, DVB cable can be used : Germany, Netherlands, Sweden, Switzerland, Denmark, Austria, Finland, Norway, Slovenia, Hungary, Ukraine, Ireland, Poland, Romania, Spain, Bulgaria, Russia, Lithuania, Estonia, Latvia, Czech. (The supported country can be added.) yyIn the following country, Digital TV can not be used : Bosnia, Kazakhstan. Watching TV 1 In Standby mode, press (POWER) to turn the TV on. 2 Press INPUT and select Antenna. 3 To turn the TV off, press (POWER). The TV switches to Standby mode. Selecting Cable, yyAcquired certification SO : Sweden(Comhem, Canal Digital), Denmark(YouSee, Canal Digital, Stofa), Norway(Canal Digital), Netherlands(Ziggo, UPC Digitaal), Ukraine(Volia-Cable), Germany(KDG), Switzerland(CableCom, UPC), Austria(UPC Digital), Hungary(UPC Digital), Ireland(UPC Digital), Poland(UPC Digital), Romania(UPC Digital), Russia(OnLime)(The acquired certification SO can be added.) yyIf there are not any Service Operator that you want, select Other Operators. yyIf you select “Other Operators”, or the selected country supports “Other Operators” only, it may take some time to search all the channels, or it may not search some of the channels. yyIf some of the channels do not appear, follow the steps below: 1. SETUP -> Auto Tuning -> Cable -> Setting 2. Switch Home Tuning from "Off" to "On" 3. Input additional values such as the frequency, symbol rate, modulation, and network ID. (You can ask your cable service provider for the above information.) 1 Press Home to access the main menus. 2 Press the Navigation buttons to scroll to SETUP and press OK. 3 Press the Navigation buttons to scroll to Auto Tuning and press OK. 4 Press the Navigation buttons to scroll to Cable and press OK. 5 Press the Navigation buttons to scroll to Comhem or Other Operators and press OK. 6 Press the Navigation buttons to scroll to Quick or Full and press OK. 7 Press the Navigation buttons or Number buttons to scroll make appropriate adjustments (Except for Full mode) and press OK. 8 Select Start to start automatic tuning. The TV scans and saves available programmes automatically. 9 When you are finished, press EXIT. When you return to the previous menu, press BACK. The following values are needed in order to search all available programmes quickly and correctly. The commonly used values are provided as "default". However, for correct settings, please inquire of the cable service provider. When running Auto Tuning in DVB cab...
Dieses Handbuch ist für folgende Modelle:Fernseher - 60PZ850 (8.05 mb)
Fernseher - 60PZ850N (8.05 mb)