Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 12 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  KDL-46Z5500

Dieses Gerät hat auch andere Anweisungen:

Fernseher - KDL-46Z5500 (3.02 mb)

Fernseher - KDL-46Z5500 (13.69 mb)

Fernseher - KDL-46Z5500 (13.41 mb)

Fernseher - KDL-46Z5500 (13.36 mb)

Alle anzeigen

Fernseher - KDL-46Z5500 (7.75 mb)

Execute “Server Diagnostics” (63). The TV cannot be found from renderer- compatible device (the controller). Check Connections • Check that the LAN cable and/or mains lead of the server has not become disconnected. Check Settings • Check if the “Renderer Function” is activated (107). 115/119 Troubleshooting • Check that the connected device is registered under “Renderer Access Control” (107). Only a few icons appear under the “Network“ in the Home Menu. • This is normal when internet connection is not available. You can use three pre-installed Widgets properly. To enjoy more Widgets, please check that the LAN cable and/or mains lead/AC power cord of the router/modem has not become disconnected. (*) You have been using registered Widgets, but now some contents won't appear on the Widgets. • Check that the LAN cable and/or mains lead/ AC power cord of the router/modem has not become disconnected. (*) • There's a possibility that the Widget Provider's server is out of service. Please try using the Widget later. (*) Your router/modem must be properly set to connect to the internet in advance. Please contact your Internet Service Provider for the router/modem settings. 116/119 Troubleshooting General Auto Setup (freesat) is stopped before it is completed. • Check connections and dish alignment. The dish needs to be pointing at Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East. • If the problem persists, consult your freesat registered retailer or call Freesat (UK) Ltd on 0844 881 6700 or visit Some programmes cannot be tuned. • Check the aerial or dish. • The satellite cable might be short-circuited or there might be connection problems of the cable. Please check the cable and connection and then turn the TV Off with the Mains power On/Off switch, and turn it On again. • The frequency you entered is out of range. Please consult the received satellite broadcasting company. Distorted picture and/or sound. • Keep the TV away from electrical noise sources such as cars, motorcycles, hair-dryers or optical equipment. • When installing optional equipment, leave some space between the optional equipment and the TV. • Check the aerial/cable connection. • Keep the aerial/cable TV cable away from other connecting cables. 117/119 Troubleshooting The TV turns off automatically (the TV enters standby mode). • Check if the “Sleep Timer” is activated, or confirm the “Duration” setting of “On Timer” (70). • Check if the “Idle TV Standby” is activated (71). • If no signal is received and no operation is performed in the TV mode for 30 minutes, the TV automatically switches to standby mode. The TV turns on automatically. • Check if the “On Timer” is activated (70). Some input sources cannot be selected. • Select “AV Preset” and cancel the “Skip” setting for the input source (90). The remote does not function. • Replace the batteries. HDMI equipment does not appear on “HDMI Device List”. • Check that your equipment is compatible with Control for HDMI...

Herunterladen

Geben Sie zwei Ziffern: