Stimmen - 5, Durchschnittliche Bewertung: 4.2 ( )

Hersteller: Sony Dateigröße: 3.07 mb Dateiname: Unterrichtssprache:

2 Select “Server Display Settings”. 3 Select the server you want to display on the Home Menu, and adjust the settings. If you cannot connect to your home network The TV detects if the server is being correctly recognised when you cannot connect it to your home network. If the diagnostic results indicate a failure, check possible causes, and network connections and settings. 1 Press HOME, then select > “Network” > “Home Network Setup”. 2 Select “Server Diagnostics”. The server diagnostic starts. When the server diagnostic is complete, the diagnostic result list appears. 24 GB Additional Information Additional Information When the 1 (standby) indicator is flashing, count how many times it flashes (interval time is three seconds). Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform your dealer or Sony service centre of how the indicator flashes (number of flashes). When the 1 (standby) indicator is not flashing, check the items in the tables as follows. Also refer to “Troubleshooting” in the i-Manual. If the problem persists, have your TV serviced by qualified service personnel. Condition Explanation/Solution There is no picture (screen • Check the antenna (aerial)/cable connection. is dark) and no sound. • Connect the TV to the AC power (mains), and press 1 on the TV. • If the 1 (standby) indicator lights up in red, press "/1. Tiny black points and/or • The screen is composed of pixels. Tiny black points and/or bright bright points appear on the points (pixels) on the screen do not indicate a malfunction. screen. Some programmes cannot • Check the antenna (aerial) or dish. be tuned. • The satellite cable might be short-circuited or there might be connection problems of the cable. Check the cable and connection and then turn the TV off with the Mains power On / Off switch, and turn it on again. • The frequency you entered is out of range. Consult the received satellite broadcasting company. The TV’s power cannot be • Check if ENERGY SAVING switch is on (z). turned on. The TV turns off • Check if the “Sleep Timer” is activated, or confirm the automatically (the TV “Duration” setting of “On Timer”. • Check if the “Idle TV Standby” is activated. enters standby mode). • Check if the “Presence Sensor” is activated. When no viewer is detected in front of the TV for a preset time, the picture automatically turns off, while leaving only the TV sound on. Additionally, after 30 minutes in picture off mode, the TV will switch to standby mode. The remote does not • Replace the batteries. function. • Your TV may be in SYNC mode. Press SYNC MENU, select “TV Control” and then select “Home (Menu)” or “Options” to control the TV. The “Parental Lock” • Enter 9999 for the PIN code. (PIN code 9999 is always accepted.) password has been forgotten. Additional Information The TV surrounds become • When the TV is used for an extended period, the TV surrounds warm. become warm. You may feel hot when touching there by the hand. 25 GB Specifications Specifications Panel system LCD (Liquid Crystal Display) Panel TV system Analogue: Depending on your country/area selection: B/G/H, D/K, L, I, M Digital: DVB-T/DVB-C Satellite: DVB-S/DVB-S2 Colour/video system Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input) Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4 Channel coverage Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41 D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69/M: A2-A13, A14-A79 Digital: VHF/UHF Satellite: IF Frequency 950-2150 MHz Sound output 10 W + 10 W + 10 W + 10 W (KDL-60NX725) 10 W + 10 W + 10 W (KDL-55/46HX925, KDL-55/46HX825, KDL-55/46/40NX725) Input/Output jacks Antenna (aerial) cable 75 ohm external terminal for VHF/UHF Satellite antenna (aerial) Female F-Type Connector IEC169-24, 75 ohm. DiSEqC 1.0, LNB 13V/18V & 22 KHz tone / AV1 21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video output. AV2 Video input (phono jack) / COMPONENT IN Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i Audio input (phono jacks) HDMI IN1, 2, 3, 4 Video: 1080/24p/30p, 1080p, 1080i, 720/24p/30p, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital Analogue audio input (minijack) (HDMI IN4 only) PC Input ARC (Audio Return Channel) (HDMI IN1 only) DIGITAL AUDIO OUT (OPTICAL) Digital optical jack (Two channel linear PCM, Dolby Digital) AUDIO OUT / i Audio output (phono jacks) Headphones jack / PC IN PC Input (Mini D-sub 15-pin) PC audio input (minijack) 1, 2 (HDD REC) USB port, USB HDD device port ( 2 only) CAM (Conditional Access Module) slot LAN 10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not guaranteed for this TV.) Model name KDL60NX725 55HX925 55HX825 55NX725 Power and others Power requ...

Herunterladen

Geben Sie zwei Ziffern: