Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 7.25 mb Dateiname: Unterrichtssprache:

Fotos und technische Daten  Sony  KDL-46S2510

“Warm1”/“Warm2”: Gives the white colours a red tint. “Warm2” gives a redder tint than “Warm1”. Tip “Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”. 20 GB Sharpness Sharpens or softens the picture. Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. “Auto”: Automatically reduces the picture noise. “High”/“Medium”/“Low”: Modifies the effect of the noise reduction. “Off”: Turns off the Noise Reduction feature. Advanced Settings Customizes the Picture function in more detail. When you set “Picture Mode” to “Custom”, you can set/change these settings. “Reset”: Resets all the advanced video settings to the factory settings. “Black Corrector”: Enhances black areas of the picture for stronger contrast. “Adv. Contrast Enhancer”: Automatically adjusts “Contrast” to the most suitable settings judging from the brightness of the screen. This setting is especially effective for dark images, increasing vibrancy in the picture. “Gamma”: Adjusts the balance between bright and dark areas of the picture. “Clear White”: Emphasizes white colours. “Live Colour”: Makes colours more vivid, and reproduce clear skin tones. Tip This function is only available when "Colour Space" is set to "Wide". “Colour Space”: Changes colour range (only for KDL-46S2510, KDL-46S2530, KDL-40S2510, KDL-40S2530). “MPEG Noise Reduction”: Reduces the picture noise in MPEG-compressed video (in digital mode only). Using MENU 21 GB Sound menu You can select the options listed below on the Sound menu. To select options in “Settings”, see “Navigating through menus” (page 19). Target Inputs Selects whether to apply settings made in the Sound menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Sound Mode Selects the sound mode. “Dynamic”: Enhances treble and bass. “Standard”: For standard sound. Recommended for home entertainment. “Custom”: Flat response. Also allows you to store your preferred settings. Reset Resets the sound settings except “Sound Mode”, “Dual Sound” and “i Speaker Link” to the factory settings. Treble Adjusts higher-pitched sounds. Bass Adjusts lower-pitched sounds. Balance Emphasizes left or right speaker balance. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). Volume Offset Adjusts the volume level of the current input relative to other inputs, when “Target Inputs” is set to “Viewing Only”. Surround Selects the surround mode. “TruSurround XT”: For surround sound (for stereo programmes only). “Simulated Stereo”: Adds a surround-like effect to mono programs. “Off”: For normal stereo or mono reception. BBE Gives sound more impact by compensating for phase effects in speakers using the “BBE High Definition Sound System”. 22 GB Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. “Stereo”, “Mono”: For a stereo broadcast. “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. Tip If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. i Speaker Link Switches the TV’s internal speakers on/off when headphones are connected. “On”: Sound is output only from headphones. (headphone speaker “Off”: Sound is output from both the TV and headphones. link) Tip “Treble”, “Bass”, “Balance”, “Auto Volume”, “Surround” and “BBE” cannot be used for headphones and audio output sockets. 23 GB Using MENU Screen menu You can select the options listed below on the Screen menu. To select options in “Settings”, see “Navigating through menus” (page 19). Target Inputs Selects whether to apply settings made in the Screen menu to all inputs, or only to the input currently being watched. “All”: Applies settings to all inputs. “Viewing Only”: Applies settings only to the current input. Screen Format For details about the screen format, see “To change the screen mode manually to suit the broadcast” (page 14). Auto Format Automatically changes the screen format according to the broadcast signal. To keep your setting, select “Off”. Tips • Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of the screen by pressing repeatedly. • “Auto Format” is available for PAL and SECAM signals only. 4:3 Default Selects the default screen mode for use with 4:3 broadcasts. “Smart”: Displays conventional 4:3 broadcasts with an imitation wide screen effect. “4:3”: Displays conventional 4:3 broadcasts in the correct proportions. “Off”: Keeps the current “Screen Format” setting when the channel or input is changed. Tip This option is available only if “Auto Format” is set to “On”. Display Area Adjusts the screen area displaying the picture. “Normal”: Displays the picture in the original size. “–1”/“–2”: Enlarges the picture to hide the edge of the pict...

Herunterladen

Geben Sie zwei Ziffern: