Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Sony Dateigröße: 2.22 mb Dateiname: Unterrichtssprache:

Dieses Gerät hat auch andere Anweisungen:

Fernseher - KDL-40NX803 (2.52 mb)

Fernseher - KDL-40NX803 (2.81 mb)

Fernseher - KDL-40NX803 (1.45 mb)

Fernseher - KDL-40NX803 (2.81 mb)

*2 4 hours a days and 365 days a year ~ • To save power consumption – when you reduce backlight setting (the brightness of the screen), the power consumption reduce. – the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby” ) help you to reduce the power consumption and thus save money by reducing electricity bills. – when you switch off the TV using the ENERGY SAVING SWITCH (only certain models), power consumption will be almost zero. Design and specifications are subject to change without notice. 12 GB Installing the Accessories (Wall-Mount Bracket) Installing the Accessories (Wall-Mount Bracket) For product protection and safety reasons, Sony strongly recommends that installing of your TV be performed by Sony dealers or licensed contractors. Do not attempt to install it yourself. To Sony Dealers and Contractors: Provide full attention to safety during the installation, periodic maintenance and examination of this product. Your TV can be installed using the SU-WL700 Wall-Mount Bracket (sold separately). • Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the installation. • Refer to “Detaching the Table-Top Stand from the TV” (page 7). ~ • Remove the bottom cover and terminal cover when installing on a wall (KDL-52/40NX803 only). • Be sure to use the black spacers supplied with the TV when installing on a wall (KDL-52/40NX803 only). Sufficient expertise is required for installing this product, especially to determine the strength of the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the installation. Sony is not liable for any damage or injury caused by mishandling or improper installation. Additional Information Precautions Be sure to install the Wall-Mount Bracket securely to the wall following the instructions in this as well as the manual provided with the Wall-Mount Bracket. The numbers given in the parentheses indicate the installation steps described in the instruction manual provided with Wall-Mount Bracket. 1 Check the parts supplied with the Wall- Mount Bracket (1). Refer to the instruction manual provided with the Wall-Mount Bracket. 2 Decide on the installation location. (2-1) Refer to the following “TV installation dimensions table”. Allow for suitable clearance between the TV, the ceiling and protruding parts of the wall as instructed. 3 Install the Base Bracket on the wall. (2-2 through 3) Decide the positions of the screw on the wall and install the Base Bracket. Refer to the instruction manual provided with the Wall-Mount Bracket for details. 4 Detach the Table-Top Stand from the TV, if necessary. (4-1) • Remove the bottom cover and terminal cover first before detaching the Table- Top Stand (KDL-52/40NX803 only). • See “Detaching the Table-Top Stand from the TV” (page 7) for details. 5 Connect the supplied AC power cord (mains lead). (5-1) ~ • Do not attach the bottom cover. (Continued) 13 GB 6 Place the spacers (KDL-52/40NX803 7 Attach the Mounting Bracket and the only). Lock Bracket. (4-3 through 4-7) 1 Remove the four screws, and be sure to store them in a safe place, keeping them away from children. 2Place the four spacers (supplied). ~ • When attaching the Table-Top Stand again, be sure to fasten the four screws (previously removed) to the original holes on the rear of the TV (KDL-52/40NX803 only). Refer to the instruction manual provided with the Wall-Mount Bracket. 8 Prepare the paper template. (5-2) 1. Refer to the following “TV installation dimensions table” and mark the TV outline on the template. 2. Tape the template to the wall as instructed in the manual provided with the Wall-Mount Bracket. Follow the instruction manual provided with the Wall-Mount Bracket to complete the installation. (5-3 through 6) TV installation dimensions table Screen centre point Unit: cm Model Name KDL- Display dimensions Screen centre dimension Length for each mounting angle Angle (0°) Angle (20°) A B C D E F G H 52NX803 126.1 78.7 1.3 42.1 7.5 38.9 74.5 48.8 46NX703 112.7 71.6 5.2 42.7 7.5 36.2 67.9 49.3 40NX803 99.4 63.5 8.9 42.1 7.5 33.7 60.2 48.8 40NX703 99.4 64.1 8.9 42.7 7.5 33.7 60.8 49.3 Figures in the above table may differ slightly depending on the installation. WARNING The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 11) for its weight. 14 GB Safety Information Safety Information Install and use the TV set in accordance with the instructions below in order to avoid any risk of fire, electrical shock or damage and/or injuries. Installation • The TV set should be installed near an easily accessible mains socket. • Place the TV set on a stable, level surface. • Only qualified service personnel should carry out wall installations. • For safety reasons, it is strongly recommended that you use Sony accessories, includi...

Herunterladen

Geben Sie zwei Ziffern: