Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Read it carefully before you star t the installation and setup. • The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the product. • To completely disconnect the power input, the mains plug of the product shall be disconnected from the mains. • Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. • No naked flame sources, such as lighted candles, should be placed on the product. Recycling Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. When this logo is attached to a product, it means a financial contribution has been paid to the associated national recover y and recycling system. © 2010 Koninklijke Philips Electronics N.V. All rights reser ved. Reproduction in whole or in par t is prohibited without the written consent of the copyright owner.Trademarks are the proper ty of Koninklijke Philips Electronics N.V. or their respective owners. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: 4 EN 2 Your SDV7120 Congratulations on your purchase and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at com/welcome. Overview 1 UHF log periodic antenna 2 VHF rod antenna 3 UHF/VHF gain control switch 4 Power switch with LED indicator 5 9V DC power connection 6 Coaxial cable (for T V connection) 7 230-240V AC/9V DC power adaptor (included) 8 Antenna base with female connector 9 UHF log periodic antenna with male connector 2 3468 English EN 5 2 Connect the other end of the built-in 3 Get started coaxial cable to the input on the TV receiver. To ensure the antenna to work properly, read the user manual of your television before you star t. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is impor tant for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note • Choose a location near a window which gives the antenna a clear view of the transmitter. Note • Place the antenna away from the metal sur face to avoid inter ference. Connect to the TV 1 Assemble the antenna base to the UHF log periodic antenna. 3 Connect the DC plug to the antenna and the power supply to a 230V AC outlet. 4 Turn the power switch on. »The blue LED is lit. 6 EN English 4 Set up SDV7120 Note • It is possible to switch the gain control level down for best reception. For VHF/FM reception 1 To turn the amplifier up, switch the gain 2Ex tend the VHF rod antenna to the longest possible length. 3Turn the TV or FM radio to the desired channel/station. Move the VHF rod antenna in different directions up and down until the reception is achieved. control towards the max level. For UHF reception 1 Turn the TV to the desired channel/ station. 2 To turn the amplifier up, switch the gain control towards the max level. 3Tilt or swivel the UHF log periodic antenna towards the transmitter until the reception is achieved. EN 7 Note • It is possible to switch the gain control level down for best reception. Note • The UHF log periodic element only allows 90 degrees rotation. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. This automatic process is par t of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then re-connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. 5 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this antenna can receive analogue television broadcasts in the UHF and VHF bandwidths. Can this antenna receive digital or work with HD-DVB broadcasts? Yes, this antenna is designed to receive digital DVB and HDTV broadcasts in the UHF & VHF bandwidths. Can the antenna be powered by a DC power supply in a boat, RV or camper? Yes, there is a DC power socket located at the back of the antenna. Plug your cable/adapter into the antenna and then into your ...