Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. 4 EN 2 Your SDV7220/12 Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at Overview 1 UHF antenna 2 Coaxial cable 1.8m (to amplifier connection) 3 Antenna stand 4 Amplifier 5 Coaxial cable 1.2m (to TV connection) 6 LED power indicator 7 3-stage gain control switch 8 Wall mount plate 9 Wall mount screws x 2 10 100-240V AC / 6V DC power adaptor (included) ji abcdfge EN 3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an antenna instead of cable. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note ••Choose a location near a window which gives the antenna a clear view of the transmitter. Note ••Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Connect one end of the UHF antenna coaxial cable to the amplifier. 2 Connect one end of the amplifier coaxial cable to the TV receiver. 3 Connect the DC plug to the amplifier and the power supply to a 100-240V AC outlet. EN 4 Set up the SDV7220/12 Set up on the table 1 The antenna can be used with or without the included stand as below. 2 Slide the gain control switch of the amplifier towards the max. position. Note ••It is possible to slide the gain control switch towards the min. position or remove the amplifier for best reception. Assemble antenna and stand 1 Unwrap the stand from the tablet of antenna. 2 Position the stand to the notches of the antenna. 3 Slide the stand to fix it on the antenna. Tip ••To disassemble the stand, reverse the assembly procedure. 14 EN Mount on the wall 1 Mount two wood screws into the wall with 80mm (3.149") of center distance. 2 Plug the plastic bracket into two notches on the rear housing, then push it up to lock in. 3 Attach the plastic bracket to the wood screws on the wall. 4 Slide the gain control switch of the amplifier towards the max. position. Tip ••It is possible to slide the gain control switch towards the min. position or remove the amplifier for best reception. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: • Connect the antenna to a digital tuner. If the signal strength is good enough, the channels can be memorized in the tuner automatically . • Connect the antenna directly to the TV. Tune to the analogue channels and find the best antenna location. Then re-connect the antenna to the digital tuner. Ensure the signal strength is good enough before you install the channels with the tuner. ab ab 14 EN 5 Frequently asked questions Can this antenna work with Analogue transmissions? Yes, this antenna can receive analogue television broadcasts in the UHF bandwidths. Can this antenna receive digital or work with ATSC broadcasts? Yes, this antenna is designed to receive ATSC and HDTV broadcasts in the UHF bandwidths. Can the antenna be powered by a DC power supply in a boat, RV or camper? Yes, there is a DC power socket located at the back of the antenna. Plug your cable/adapter into the antenna and then into your power source. Where should I place the antenna in order to get the best reception possible? Choose a location near a window which gives the antenna a clear view of the transmitter. For best reception: • place the antenna away from the metal surface to avoid interference; • try both lying or standing positions; • try to connect to TV with or without the amplifier as below. How do I know how much gain (amplification) is required to receive a clear picture? Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifier down to receive a clearer picture. Can I set up this antenna with a digital tuner? Yes, this antenna can be set up with a digital tuner. (see 'Set up a digital tuner with this antenna' on page 8) 6 Warranty and Service Warranty information can also be found at: For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips.com ab EN 7 Glossary A Amplifier A device, either a single stage or a large scale circuit with multiple stages for creating gain, i.e. it makes small signals larger. Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal. C Coaxial A singl...