Stimmen - 0, Durchschnittliche Bewertung: 0 ( )

Hersteller: Philips Dateigröße: 1.77 mb Dateiname: Unterrichtssprache:

Update using a USB device Connect your USB storage device to the TV. 1 If the software update screen does not appear automatically, select [Setup] > [Software update] > [Local updates] > [USB]. 2 Press OK to update the T V software manually. 3 Follow the on-screen instructions to complete the update. Note • The T V restar ts af ter the sof tware update is complete. 24 EN English Update using OAD Change TV preferences 1 If using (DVB-T) digital broadcast, your TV automatically receives software Use the preferences menu to customise your updates. If you receive a message on TV settings. your screen asking you to update your 1 Press MENU. software: • Select [Update now] to update the software immediately. • Select [Remind me later] to exit the update screen at that time and be reminded later. • Select [Cancel] to skip the update. 2 If you select [Cancel], you can manually access the OAD update by selecting [Setup] > [Software update] > [Local updates] > [OAD]. 3 Select the available version of OAD and press OK. 4 Follow the on-screen instructions to star t the update. Note • The T V restar ts af ter the sof tware update is complete. 2 Select [Setup] > [Installation] > [Preferences]. • [Location]: Optimises TV settings for your location - home or shop. • [Volume bar]: Displays the volume bar when you adjust the volume. • [Channel info.]: Displays information about the T V channel ever y time you switch channels. Select [Full] to view channel information or [Off] to turn off the channel information. • [Universal access]: Enables or disables the universal access menu. • [EasyLink]: Enables one-touch play and one-touch standby between EasyLink-compliant devices. • [Pixel Plus Link]: Overrides the settings of connected devices and uses the settings of the TV. (Only available if EasyLink is switched on.) • [Teletext 2.5]: Enables or disables Teletex t 2.5. (For digital TV) • [E-sticker]: For shop mode only. Sets the location of the e-sticker. 3 Press to select your preference. 4 Press OK. 5 Press MENU to exit. EN 25 Access decoder channel You can map channels provided through a decoder or descrambler to your TV channel selection. In this way, you can select these channels by using the RC of your TV. The decoder or a descrambler must be connected to EXT1 (SCART). Set decoder channel Map channels from a decoder or descrambler. 1 Press MENU. 2 Select [Setup] > [Installation] > [Decoder]. 3 Press to enter [Decoder] menu. 4 Press to select [Channel], then press to enter. 5 Select one channel to map to the decoder / descrambler channel and press OK to confirm. 6 Select [Status], then press to enter. 7 Select [EXT 1] (SCART) the connector used by the decoder / descrambler. 8 Press OK. 9 Press MENU to exit. Note • Selec t [None] if you do not want to map to the decoder / descrambler channel. Start a TV demo You can use demonstrations to better understand the features of your T V. Some demos are not available on cer tain models. Available demos are displayed in the menu list. 1 Press DEMO on the remote control. 2 Press to select a demo and press OK to view it. 3 Press DEMO to exit. Reset the TV to factory settings You can restore the default picture and sound settings of your TV. The channel installation settings remain the same. 1 Press MENU. 2 Select [Setup] > [Installation] > [Factory settings]. 3 Press to enter [Factory settings]. 4 Select [Reset] to star t resetting. 5 Press OK. 6 Press MENU to exit. 26 EN 6 Install channels The first time you set up your TV, you are prompted to select a menu language and to install TV and digital radio channels (if available). This chapter provides instructions on how to re-install and fine tune channels. Automatically install channels This section describes how to search and store channels automatically. Step 1 Select your menu language 1 Press MENU. 2 Press to select [Setup] > [Installation] > [Language] > [Menu 345language]. Press OK or to enter [Menu language]. Press to select a language. Press OK to confirm. 6 Press to return to [Installation] menu. Step 2 Select your country Select the countr y where you are installing the T V. The available channels for the country are installed on the TV. 1 Press MENU. 2 Press to select [Setup] > [Installation] > [Channel installation] > [Automatic channel search]. 3 Press OK or to enter the menu. » The countr y menu appears. 4 Press to select your countr y. 5 Press OK to confirm your choice. » The channel installation guide appears on the screen. Step 3 Install channels Automatically installs the available analogue and digital TV channels and digital radio channels. 1 From the channel installation guide screen, select [Full installation]. 2 Press OK to confirm. » The TV star ts to search and store all the available channels. 3 When installation is complete, press OK to exit the installation menu. Update the channel list You can enable automatic update of channels when your T V is in standby mode. The channels stored in your TV are updated ever...

Herunterladen

Geben Sie zwei Ziffern: