Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
2 Press PROG +/– or the number buttons to select the TV PROG channel. or For double digit numbers, press -, then the number (e.g., for 25, press -, then 2 and 5). 1 2 3 4 5 6 7 8 0 9 Note • When you turn on the projection TV, either the program number or video mode is displayed for approximately 40 seconds. The ECO MODE ( ) icon will also appear if “ECO MODE “ in the “SETUP” menu is set “ON” (see page 43). continued Using Your New Projection TV 15 Watching the TV (continued) To select a TV program quickly (1) Press and hold PROG +/–. (2) Release PROG +/– when the desired program number appears. Note • When you select a TV program quickly, the picture may be disrupted. This does not indicate a malfunction. Additional tasks To Press Turn off temporarily @/1. The 1 indicator on the projection TV lights up red. Turn off completely ! on the projection TV. Adjust the volume 2 +/–. Mute the sound %. Watch the video input (VCR, camcorder, etc.) t (or t on the projection TV) to select “VIDEO 1”, “VIDEO 2”, “VIDEO 3”, “VIDEO 4”, “HD/DVD 1” or “HD/DVD 2”. To return to the TV screen, press a (or t on the projection TV). Watch the component input HD/DVD to select “HD/DVD 1” or “HD/DVD 2”. (DVD, DTV receiver) To return to the TV screen, press a (or t on the projection TV). Jump back to the previous channel JUMP. Display the on-screen information* . * Some picture/sound settings, and either the program number or video mode are displayed. The on-screen display for the picture/sound settings disappears after about 3 seconds. Using Your New Projection TV Setting the Wake Up timer Press until the desired WAKE UP TIMER:10M period of time appears. After 10 minutes The Wake Up timer starts immediately after you have set it. WAKE UP TIMER:OFF WAKE UP TIMER:12H00M No Wake Up Timer After 12 hours 2 Select the TV channel or video mode you want to wake up to. 3 3 Press !/1, or set the Sleep timer if you want the projection TV to turn off automatically. The indicator on the projection TV lights up orange. To cancel the Wake Up timer Press until “WAKE UP TIMER: OFF” appears, or press ! on the projection TV to turn it off. Note • If no buttons or controls are pressed for more than two hours after the projection TV is turned on using the Wake Up timer, the projection TV automatically goes into standby mode. To resume watching the TV, press any button on the projection TV or the remote. Setting the Sleep timer Press until the desired period of time appears. SLEEP TIMER:30M SLEEP TIMER:60M After 30 minutes After 60 minutes The Sleep timer starts immediately after you have set it. SLEEP TIMER:OFF SLEEP TIMER:90M No Sleep Timer After 90 minutes To cancel the Sleep timer Press until “SLEEP TIMER: OFF” appears, or turn the projection TV off. Using Your New Projection TV Using Your New Projection TV 17 Advanced Operations Advanced Operations Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “PERSONAL” option. Selecting the picture mode 0 JUMP PROG OPTION RESET Press repeatedly until the desired picture mode DYNAMIC STANDARD is selected. PERSONAL HI-FINE Select To “DYNAMIC” receive high contrast pictures. “STANDARD” receive normal pictures. “HI-FINE” receive higher density pictures with mild contrast. “PERSONAL” receive the last adjusted picture setting from the “ADJUST” option in the “PICTURE” menu (see page 38). Selecting the sound mode Press repeatedly until the desired sound mode is selected. 9DYNAMIC 9PERSONAL 9SOFT 9DRAMA Select To “DYNAMIC” listen to dynamic and clear sound that emphasizes both the low and high tones. “DRAMA” listen to sound that emphasizes voice and high tones. “SOFT” receive soft sound. “PERSONAL” receive the last adjusted sound setting from the “ADJUST” option in the “SOUND” menu (see page 40). Tip •You can also set the picture and sound modes using the menu (see “Changing the “PICTURE” setting” on page 36 and “Changing the “SOUND” setting” on page 39). Advanced Operations Viewing higher quality pictures — “DRC-MF” The Digital Reality Creation-Multi Function (DRC-MF) feature allows you to enjoy higher quality pictures on your projection TV. You can select “DRC1250” to watch super real (higher resolution) pictures, or “DRC100” for moving pictures or “PROGRESSIVE” for still pictures to reduce flicker if necessary. VIDEO DRC-MF HD/DVD 1 2 3 4 5 6 7 8 0 9 JUMP A/B PROGINDEXMENU TWIN PROG+ TWIN PROG– DRC-MF Advanced OperationsDRC-MF: DRC1250 DRC-MF: DRC100 DRC-MF: PROGRESSIVE DRC-MF Press DRC-MF repeatedly until you receive the desired picture quality. Select To “DRC1250” select higher resolution pictures. “DRC100” reduce flicker on the screen. “PROGRESSIVE” reduce jitter of any small areas or scanning lines (e.g., letters or the edge of objects) on the screen. Tip • When the broadcast signal is weak, you may see some dots or noise on the TV screen. To reduce this interference, display the “PICTURE” menu and select “ADJUST” in “PICTURE MODE”, then a...