Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Tips • To turn on the TV speakers again, change to on. • The “One Time Off” option automatically returns to “On” when the TV set is switched off. • “Sound Adjustment” options are not available if “One Time Off” or “Permanent Off” have been selected. 14 GB Features menu Features Select: Enter: Exit: MENUBack: Screen Power Saving AV2 Output RGB Center PC Adjustment Sleep Timer Standard TV0 Off You can select the options listed below on the Features menu. To select options in “Settings”, see “Navigating through menus” (page 12). Screen Changes the screen format. • “Auto Format”: Automatically changes the screen format according to the broadcast signal. • “Screen Format”: For details about the screen format, see page 11 • “Vertical Size”: Adjusts the vertical size of the picture when the screen format is set to Smart. Tips • Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of the screen by pressing repeatedly. • “Auto Format” is available for PAL and SECAM signals only. Power Saving Selects the power saving mode to reduce the power consumption of the TV. • “Standard”: Default settings. • “Reduce”: Reduces the power consumption of the TV. • “Picture Off”: Switches off the picture. You can listen to the sound with the picture off. AV2 Output Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. • “TV”: Outputs a broadcast. • “Auto”: Outputs whatever is being viewed on the screen (except signals from the / 3, HDMI IN 6, HDMI IN 7 and PC sockets). RGB Center Adjusts the horizontal picture position so that the picture is in the middle of the screen. Tip This option is only available if an RGB source has been connected to the Scarts connectors 1/ 1 or 2/ 2 on the rear of the TV. PC Adjustment Customizes the TV screen as a PC monitor. Tip This option is only available if you are in PC Mode. • “Phase”: Adjust the screen when a part of a displayed text or image is not clear. • “Pitch”: Enlarges or shrinkes the screen size horizontally. • “H Center”: Moves the screen to the left or to the right. • “V Lines”: Corrects the picture lines while viewing an RGB input signal from the PC connector. • “Power saving”: Turns to standby mode if no PC signal is received. • “Reset”: Resets to the factory settings. Using MENU Continued 15 GB Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the Sleep Timer is activated, the indicator on the TV (front) lights up in amber. Tips • If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”. • “Sleep timer will end soon. Power will be turned off” appears on the screen one minute before the TV switches to standby mode. Set-up menu You can select the options listed below on the Set-up menu. To select options in “Settings”, see “Navigating through menus” (page 12). Set Up Auto Start Up Language Country Auto Tuning Programme Sorting AV Preset Sound Offset Manual Programme Preset English - Select: Enter: Exit: MENUBack: Auto Start-up Starts the “first time operation menu” to select the language and country/region, and tune in all available channels. Language Selects the language in which the menus are displayed. Country Selects the country/region where you operate the TV. Tip The country/region in which you want to use the TV does not appear in the list, select “-” instead of a country/region. Auto Tuning Tunes in all the available channels. Programme Sorting Changes the order in which the channels are stored on the TV. 1 Press F/f to select the channel you want to move to a new position, then press g. 2 Press F/f to select the new position for your channel, then press . AV Preset Assigns a name to any equipment connected to the side and rear sockets. 1 Press F/f to select the desired input source, then press . 2 Press F/f to select the desired option below, then press . • AV1 (or AV2/ AV3/ AV4/ PC/ HDMI 1/HDMI 2), VIDEO, DVD, CABLE, GAME, CAM, SAT: Uses one of the preset labels to assign a name to connected equipment. • “Edit”: Creates your own label (Not available for PC, HDMI 1, HDMI 2). • “Skip”: Skips an input source that is not connected to any equipment when you press F/f to select the input source. Sound Offset Sets an independent volume level to each equipment connected to the TV. 16 GB Manual Programme Preset Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press F/f to select the programme number you want to modify. Then, press . System Presets programme channels manually. 1 Press F/f to select “System”, then press . 2 Press F/f to select one of the following TV broadcast systems, then press G. B/G: For western European countries/regions D/K: For eastern European countries/regions L: For France I: For the United Kingdom Note Depending on the country/region selected for “Country” (page 5), this option may not ...
Dieses Handbuch ist für folgende Modelle:Fernseher - KLV-26U2530 (13.19 mb)
Fernseher - KLV-32U2520 (13.19 mb)
Fernseher - KLV-32U2530 (13.19 mb)
Fernseher - KLV-40U2520 (13.19 mb)