Stimmen - 4, Durchschnittliche Bewertung: 4.8
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
• “ Warm”: Gives the white colours a red tint. Tip “Warm” can only be selected when you set “Picture Mode” to “Custom”. Reset Resets all picture settings except “Picture Mode” to the factory settings. Noise Reduction Reduces the picture noise (snowy picture) in a weak broadcast signal. • “ Auto”: Automatically reduces the picture noise. • “ High/Mid/Low”: Modifies the effect of the noise reduction. Sound Adjustment Sound Effect Treble Bass Balance Reset Dual Sound Auto Volume TV Speakers Standard 50 50 0 Mono On On Sound Adjustment menu You can select the options listed below on the Sound menu. To select options in “Settings”, see “Navigating through menus” (page 15). Exit: MENU Back: Select: Enter: Sound Effect Selects the sound mode. • “ Standard”: Enhances clarity, detail, and sound presence definition Sound System.” • “ Dynamic”: Intensifies clarity and sound presence realism by using the “BBE High definition Sound • “ BBE ViVA”: BBE ViVA Sound provides accurate natural 3D image with Hi-Fi sound. The clarity of the sound is height of sound image are expanded ViVA Sound is compatible with all movies, sports and electronic games. • “ Dolby Virtual ” : Uses the TV speakers to simulate multi channel system. • “ Off”: Flat response. Tips • You can change sound 9 repeatedly. • If you set “Auto Virtual” changes 16 GB Treble Adjusts higher-pitched sounds. Bass Adjusts lower-pitched sounds. Balance Emphasizes left or right speaker balance. Reset Resets all the sound settings to the factory settings. Dual Sound Selects the sound from the speaker for a stereo or bilingual broadcast. • “ Stereo”, “Mono”: For a stereo broadcast. • “ A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B” for sound channel 2, or “Mono” for a mono channel, if available. Tip If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”. Auto Volume Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be louder than programmes). TV Speakers Turns off the TV speakers e.g. to listen to the sound through external audio equipment connected to the TV. • “ On”: the sound is output from the TV speakers. • “ One Time Off”: the TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment. • “ Permanent Off”: the TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment. Tips • To turn on the TV speakers again, change to on. • The “One Time Off” option automatically returns to “On” when the TV set is switched off. • “ Sound Adjustment” options are not available if “One Time Off” or “Permanent Off” have been selected. Features menu You can select the options listed below on the Features menu. To select options in “Settings”, Standard see “Navigating through menus” (page 15). TV 0 Features Select: Enter: Screen Power Saving AV2 Output RGB Center PC Adjustment Timer Back: Exit: MENU Screen Changes the screen format. • “ Auto Format”: Automatically changes the screen format according broadcast signal. • “ Screen Format”: For details about the screen format, see 12 • “ Vertical Size”: Adjusts the vertical size of the picture when the screen format is set to Smart. Tips • Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the format of the screen by pressing repeatedly. • “ Auto Format” is available for PAL and SECAM Power Saving Selects the power saving mode to reduce the power consumption of the TV. • “Standard”: Default settings. • “Reduce”: Reduces the power • “Picture Off”: Switches off can listen to the sound with off. Using MENU Functions 17 GB / AV2 Output Sets a signal to be output through the socket labelled 2 on the rear of the TV. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. • “TV”: Outputs a broadcast. “Auto”: Outputs whatever is being viewed on the screen. Not available for AV3, AV5 and AV6. RGB Center Adjusts the horizontal picture position so that the picture is in the middle of the screen. Tip This option is only available if an RGB source has been connected to the Scarts connectors 1/ 1 or 2/ 2 on the rear of the TV. PC Adjustment Customizes the TV screen as a PC monitor. Tip This option is only available if you are in PC Mode. • “ Phase”: Adjust the screen when a part of a displayed text or image is not clear. • “ Pitch”: Enlarges or shrinkes the screen size horizontally. • “ H Center”: Moves the screen to the left or to the right. • “ V Lines”: Corrects the picture lines while viewing an RGB input signal from the PC connector. • “ Power saving”: Turns to standby mode if no PC signal is received. • “ Reset”: Resets to the factory settings. Timer Sets the timer to turn on/off the TV. • Sleep Timer Sets a period of time after which the TV automatically switches itself into standby mode. When the Sleep Timer is activated, the (Timer) indicator on the TV (front) li...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-40U2000 (13.2 mb)
Fernseher - KDL-32U2000 (13.2 mb)