Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Fernseher - KDL-40S2010 (5.63 mb)
Fernseher - KDL-40S2010 (1.3 mb)
Anleitung Zusammenfassung
h . d): KDL-46S2000/ KDL-46S2010/ KDL-46S2030: Approx. 1,120 . 805 . 334 mm (with stand) Approx. 1,120 . 755 . 116 mm (without stand) KDL-40S2000/KDL-40S2010/KDL-40S2030: Approx. 988 . 716 . 334 mm (with stand) Approx. 988 . 664 . 103 mm (without stand) KDL-32S2000/KDL-32S2010/KDL-32S2020/KDL 32S2030: Approx. 792 . 593 . 219 mm (with stand) Approx. 792 . 546 . 99 mm (without stand) KDL-26S2000/KDL-26S2010/KDL-26S2020/ KDL-26S2030: Approx. 658 . 516 . 219 mm (with stand) Approx. 658 . 470 . 94 mm (without stand) Mass: KDL-46S2000/ KDL-46S2010/ KDL-46S2030: Approx. 34 kg (with stand) Approx. 28 kg (without stand) KDL-40S2000/KDL-40S2010/KDL-40S2030: Approx. 27 kg (with stand) Approx. 21 kg (without stand) KDL-32S2000/KDL-32S2010/KDL-32S2020/ KDL-32S2030: Approx. 17 kg (with stand) Approx. 15 kg (without stand) KDL-26S2000/KDL-26S2010/KDL-26S2020/KDL 26S2030: Approx. 13 kg (with stand) Approx. 11 kg (without stand) Panel System LCD (Liquid Crystal Display) Panel TV System Analogue: Depending on your country/region selection: B/G/H, D/K, L, I Digital: DVB-T Colour/Video System Analogue: PAL, SECAM NTSC 3.58, 4.43 (only Video In) Digital: MPEG-2 MP@ML Aerial 75 ohm external terminal for VHF/UHF Channel Coverage Analogue: VHF: E2–E12 UHF: E21–E69 CATV: S1–S20 HYPER: S21–S41 D/K: R1–R12, R21–R69 L: F2–F10, B–Q, F21–F69 I: UHF B21–B69 Digital: VHF/UHF Terminals / 1 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, and TV audio/video output. / 2 (SmartLink) 21-pin Scart connector (CENELEC standard) including audio/video input, RGB input, selectable audio/video output, and SmartLink interface. 3 Supported formats: 1080i, 720p, 576p, 576i, 480p, 480i Y: 1 Vp-p, 75 ohms, 0.3V negative sync PB/CB: 0.7 Vp-p, 75 ohms PR/CR: 0.7 Vp-p, 75 ohms 3 Audio input (phono jacks) 500 mVrms Impedance: 47 kilo ohms HDMI IN 4 Video: 1080i, 720p, 576p, 576i, 480p, 480i Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24 bits, or analogue audio input (phono jacks) 5 S video input (4-pin mini DIN) 5 Video input (phono jack) 5 Audio input (phono jacks) Audio output (Left/Right) ( 36 GB PC PC Input (15 Dsub) (see page 37) G: 0.7 Vp-p, 75 ohms, non Sync on Green B: 0.7 Vp-p, 75 ohms, non Sync on Green R: 0.7 Vp-p, 75 ohms, non Sync on Green HD: 1-5 Vp-p VD: 1-5 Vp-p PC audio input (minijack) i Headphones jack CAM (Conditional Access Module) slot PC Input Signal Reference Chart Sound Output 10 W + 10 W Supplied Accessories Refer to “1: Checking the accessories” on page 4. Optional Accessories • Wall-Mount Bracket SU-WL51 (for KDL-46S2000/KDL-46S2010/ KDL-46S2030/KDL-40S2000/KDL-40S2010/ KDL-40S2030) SU-WL31 (for KDL-32S2000/KDL-32S2010/ KDL-32S2020/KDL-32S2030/KDL-26S2000/ KDL-26S2010/KDL-26S2020/KDL-26S2030) Design and specifications are subject to change without notice. Signals Horizontal (Pixel) Vertical (Line) Horizontal frequency (kHz) Vertical frequency (Hz) Standard VGA 640 480 31.5 60 VGA 640 480 37.5 75 VESA 720 400 31.5 70 VGA-T SVGA 800 600 37.9 60 VESA Guidelines 800 600 46.9 75 VESA XGA 1024 768 48.4 60 VESA Guidelines 1024 768 56.5 70 VESA 1024 768 60 75 VESA WXGA 1280 768 47.4 60 VESA 1280 768 47.8 60 VESA 1360 768 47.7 60 VESA • This TV’s PC input does not support Sync on Green or Composite Sync. • This TV’s PC input does not support interlaced signals. • This TV’s PC input supports the boldfaced signals in the above chart with a 60 Hz vertical frequency. • For the best picture quality, it is recommended to use signals with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be selected automatically. Additional Information 37 GB Troubleshooting Check whether the 1 (standby) indicator is flashing in red. When it is flashing The self-diagnosis function is activated. 1 Measure how long the 1 (standby) indicator flashes and stops flashing. For example, the indicator flashes for two seconds, stops flashing for one second, and flashes for two seconds. 2 Press 1 on the TV (top side) to switch it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (duration and interval). When it is not flashing 1 Check the items in the tables below. 2 If the problem still persists, have your TV serviced by qualified service personnel. Picture Problem Cause/Remedy No picture (screen is dark) and • Check the aerial connection. no sound • Connect the TV to the mains, and press 1 on the TV (top side) . •If the 1 (standby) indicator lights up in red, press " / 1. No picture or no menu • Check that the optional equipment is on and press / repeatedly until information from equipment the correct input symbol is displayed on the screen. connected to the scart • Check the connection between the optional equipment and the TV. connector Double images or ghosting • Check aerial/cable connections. • Check the aerial location and direction. Only snow and noise appear on the screen • Check if the aerial ...
Dieses Handbuch ist für folgende Modelle:Fernseher - KDL-46S2010 (15.38 mb)
Fernseher - KDL-32S2000 (15.38 mb)
Fernseher - KDL-40S2000 (15.38 mb)
Fernseher - KDL-46S2000 (15.38 mb)