Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 3.52 mb Dateiname: Unterrichtssprache:

8 Connecting a DTV receiver/set-top box (with or without ColorStream™) and a VCR This connection allows you to watch DTV (digital TV broadcast), VCR, and TV programs, and record DTV and TV programs. You can record from one source while watching a program from another source. Your TV has ColorStream component video inputs. Connecting your TV to a ColorStream-compatible DTV receiver can greatly enhance picture quality and realism. You will need: • one coaxial cable • three pairs of audio cables (two single and one pair of audio cables for a mono VCR) • two video cables • one set of ColorStream video cables (one S-video cable for a non- ColorStream DTV receiver; see notes at right) VIDEO OUT S-VIDEO AUDIO COMPONENT VIDEO OUT L R L R PRPBY Satelite IN IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT ANT-1 OUT ANT-2 ANT(75 ) S-VIDEO L/ MONO AUDIO R VIDEO-2VIDEO-1 Y PB L Y PB PRUDIO COLOR STREAM HD - 2 COLOR STREAM HD - 1 L AUDIO R OUT AUDIO CENTER CHANNEL IN L/ MONO AUDIO ON OFF VIDEO VAR AUDIO L RR IN IN DTV Receiver VCR From Antenna From DTV Antenna TV Note: For the highest possible picture quality, you must use ColorStream video cables between the TV and DTV receiver. You can connect the ColorStream cables from the DTV receiver to either ColorStream jack on the TV (HD1 or HD2). The ColorStream HD1 and HD2 jacks can be used with Progressive (480p) and Interlace (480i,1080i) scan systems. If your DTV receiver is not ColorStreamcompatible, use the S-video connections (both audio and video) instead of the ColorStream connections. Do not connect both S-Video and ColorStream cables between the TV and DTV receiver at the same time. To record from the DTV receiver, set the VCR to Line IN. To monitor recording from the DTV receiver, set the VCR to Line IN, and set the TV to Video-1. Caution: The unauthorized recording of television programs, videotapes, and other materials may infringe upon the provisions of copyright laws. IntroductionConnectingyour TV Using theRemote Control Setting upyour TV Using the TV’s Features AppendixIndex 9 Index AppendixUsing the TV’s Setting upUsing the Connectingyour TV Introduction Features your TV Remote Control Connecting two VCRs This connection allows you to record (dub/edit) from one VCR to another VCR while watching a videotape. You can also record from one TV channel while watching another TV channel. You will need: • one coaxial cable • two pairs of audio cables (two single audio cables for mono VCRs) • two video cables (two S-video cables for S-VHS VCRs) VCR1 From Antenna VIDEO AUDIO CH 3 L R CH 4 IN OUT IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN OUT ANT-1 OUT ANT-2 ANT(75 ) S-VIDEO L/ MONO AUDIO R VIDEO-2VIDEO-1 Y PB PR L Y PB PRAUDIO COLOR STREAM HD - 2 COLOR STREAM HD - 1 R L AUDIO R OUT AUDIO CENTER CHANNEL IN L/ MONO AUDIO ON OFF VIDEO VAR AUDIO L RR IN IN TV * ** VCR2 Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. You will need: • one pair of audio cables • one video cable (one S-video cable for an S-VHS camcorder) Camcorder TV front panel VIDEO AUDIO OUT L R CHANNELVOLUMEMENU TV/VIDEOL/MONO AUDIOVIDEOS-VIDEO VIDEO-3 IN Caution: The unauthorized recording of television programs, videotapes, and other materials may infringe upon the provisions of copyright laws. Note: If you have S-VHS VCRs, use S-video cables instead of regular video cables. Do not connect both a regular video cable and an S- video cable to Video-1 or Video-2 at the same time. Do not connect the same VCR to the output and input jacks on the TV at the same time. To dub or edit, VCR 2 must select Line IN, and the TV must select Video-1. * The Video OUT jack does not output the POP picture. **The Audio OUT jacks can output the sound of either the Main or POP picture (see “Selecting the Audio OUT sound” on page 49). Caution: If you have an S-VHS camcorder, use an S- video cable between the S-video jacks on the camcorder and TV. Do not connect both a regular video cable and an S-video cable at the same time. 10 Connecting an audio system This connection allows you to use an audio amplifier to adjust the audio level. This also allows you to use external speakers. To control the audio, turn on the TV and the stereo amplifier, and turn off the built-in speakers (see “Turning off the built-in speakers” on page 49). You will need: • one pair of audio cables Note: To hear sound when using an external audio amplifier, the volume of both the TV and the amplifier must be set above 0 (zero). For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even the volume of the amplifier is at its highest level. Connecting an A/V receiver This connection allows you to use an audio/video (A/V) receiver to enhance your TV’s sound. If you have a system with Dolby Pro Logic® surround sound, you can add to the realism of the sound by using the TV’s internal speakers as center channel speakers. You will need: • one pair of audio cables ...

Herunterladen

Geben Sie zwei Ziffern: