Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Toshiba Dateigröße: 4.63 mb Dateiname: Unterrichtssprache:

To lock the panel controls: 1. Press MENU, then press or to display the LOCKS menu. 2. Press ^ or Ў to display the password entering mode. 3. Use the Channel Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 4. Press ^ or Ў to highlight PANEL LOCK and press or to highlight ON. VOLUME – If a button on the top panel is . . . . . . . pressed, the message “NOT AVAILABLE” appears. . . You also can unlock the panel controls using the menus: 1. Press MENU, then press or to display the LOCKS menu. 2. Press ^ or Ў to display the password entering mode. 3. Use the Channel Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears. 4. Press ^ or Ў to highlight PANEL LOCK, and then press or to highlight OFF. To unlock the panel controls using the TV/DVD controls: Press and hold the VOLUME – button on the TV/DVD top panel for about 10 seconds until the message "PANEL LOCK:OFF" appears on-screen. 29 5X20601A(E)P26-30 29 17/3/06, 12:24 PM DVD PlaybackSetting upyour TV/DVDConnectingyour TV/DVDIntroduction AppendixUsing theTV/DVD’s Features Labeling channels Channel labels appear above the channel number display each time you turn on the TV/DVD, select a channel, or press the DISPLAY button. You can choose any four characters to identify a channel. To create channel labels: 1. Select a channel you want to label. 2. Press MENU, then press or until ENTER 6. Press ENTER to highlight LABEL. OPTION ON TIMER FAVORITE CH CH LABEL VIDEO LABEL :SELECT OFF :ADJUST . . . . . . . . . . . . . . . . . . the OPTION menu appears. 3. Press ^ or Ў to highlight CH LABEL. 4. Press or to display the CH LABEL menu. SET/CLEAR will be highlighted. 5. Press or to highlight SET. DISPLAY 7. Press or to enter a character in the first space. Press the button repeatedly until the character you want appears on the screen. Press ENTER. 8. Repeat step 7 to enter the rest of the characters. EXIT If you would like a blank space in MENU the label name, you must choose an empty space from the list of . . . . . characters; otherwise, a dash will . . . . . . appear in that space. . . 9. Repeat steps 1-8 for other channels. You can assign a label to each channel. 10. Press EXIT to return to normal viewing. Note: The character will change as below. . . . To erase channel labels: 1. Select a channel with a label. 2. Press MENU, then press or until the OPTION menu appears. 3. Press ^ or Ў to highlight CH LABEL. 4. Press or to display the CH LABEL menu. SET/CLEAR will be highlighted. 5. Press or to highlight CLEAR. 6. Press ENTER. 7. Repeat steps 1-6 to erase other channel labels. Using theTV/DVD’s Features 30 5X20601A(E)P26-30 30 17/3/06, 12:24 PM Selecting the video input source SOURCE SELECTION Press INPUT to view a signal from 0. ANT 1. VIDEO1 2. VIDEO2 another device connected to your TV/ 3. ColorStream HD 4. HDMI 5. PC DVD, such as a VCR or DVD player. You can select ANT, VIDEO-1, VIDEO [0-5] : SELECT 2, ColorStream HD, HDMI or PC, depending on which input jacks you used to connect your devices (see Press INPUT on the remote “Connecting your TV/DVD” on page control to display the current 11). signal source (press INPUT again or 0-5 to change) You also can use the CH M MMMMM / ? ????? buttons to select the video input source. In addition to cycling through your programmed channels (page 24), the CH M MMMMM / ? ????? buttons will also cycle through the video input sources, in the order illustrated below. . . . . . . . . . . Labeling the video input sources The video label feature allows you to label each input source for your TV/DVD from the following preset list of labels: Please note the following regarding the HDMI source selection: NOTE: DO NOT CONNECT A PC USING THE HDMI INPUT. ALWAYS use the VGA port provided to connect a PC. See “Connecting an HDMI™ or DVI device” on page 17 and “Connecting a PC (personal computer)” on page 20 for details. INPUT EXIT MENU Note: If the power source for the TV/DVD is interrupted (for example, the power cord is unplugged or a power failure occurs), you will need to reset the clock. DVD PlaybackSetting upyour TV/DVDConnectingyour TV/DVDIntroduction AppendixUsing theTV/DVD’s Features – VCR DVD DTV SAT CBL HD : Uses the default label name : Video cassette recorder : DVD video : Digital TV set-top box : Satellite box : Cable box : HDMI equipment To label the video input sources: 1. Press MENU, then press or to display the OPTION menu. 2. Press ^ or Ў to highlight VIDEO LABEL. 3. Press or to display the VIDEO LABEL menu. 4. Press ^ or Ў to highlight the video source you want to label. 5. Press or to select the desired label for that input source. 6. Press EXIT to return to normal viewing. Setting the clock OPTION ON TIMER FAVORITE CH CH LABEL VIDEO LABEL OFF :SELECT :ADJUST VIDEO LABEL 1.VIDEO1 2.VIDEO2 3.ColorStream HD 4.HDMI / VCR / DVD / DTV -SAT / CBL -- :SELECT :ADJUST You must set the clock before you can program the ON timer. To...

Herunterladen

Geben Sie zwei Ziffern: