Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Toshiba Dateigröße: 5.97 mb Dateiname: Unterrichtssprache:

If you leave the amplifier’s power on, the speakers may be damaged. 19 J5X00301A [E] (P14-25) 19 16/3/06, 3:48 PM 20 Connections TO USE AC POWER 1. Connect the AC cord to the AC adapter. 2. Connect the AC adapter plug into the TV/DVD’s DC input jack. 3. Connect the AC cord into a wall outlet. Notes: • Make sure to insert the plug of each cord securely. • During use the AC adapter becomes warm. This is not a malfunction. WARNING: • DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC ADAPTER OR POWER CORD. THIS COULD CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE. • DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE. CAUTION: • DO NOT USE THE AC ADAPTER IF IT IS COVERED BY A CLOTH ETC., OR PRESSED INTO A NARROW AREA. THIS RESULTS IN POOR DISSIPATION OF HEAT AND MAY CAUSE FIRE, ELECTRIC SHOCK, OR DAMAGE. • WHEN THIS UNIT IS NOT USED FOR AN EXTENDED PERIOD OF TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF SAFETY, BE SURE TO UNPLUG IT FROM THE WALL OUTLET. • DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRIC SHOCK. • IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED AC ADAPTER AND AC CORD MUST BE USED. CONTACT THE DEALER THAT YOU PURCHASED THE UNIT FROM. Power connection Power source 2 3 1 AC adapter (supplied) AC cord (supplied) AC 120V, To DC input jack 60Hz J5X00301A [E] (P14-25) 20 16/3/06, 3:48 PM Basic setup Basic setup POWER Setting the language This TV/DVD can display the on screen language in English, Spanish or French in the TV mode. Select the language you prefer first, then proceed with the other menu options. CANCEL ENTER / / / MENU Press or to select “LANGUAGE”, then press or to select the desired language: English (ENGLISH), Spanish (ESPANOL) or French (FRANCAIS), then press ENTER. 3 Press MENU and then press or to select “SETUP”.2 Press CANCEL to clear the menu screen.4 Setting the language 1 To turn on the TV/DVD, press POWER. The Power indicator on the front of the main unit will light. CANCEL SETUP LANGUAGE TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION ENGLISH CABLE ADD OFF :SELECT :ADJUST PICTURE AUDIO SETUP V-CHIP SETUP LANGUAGE ENGLISH/FRANCAIS/ESPANOL TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION ENGLISH CABLE ADD OFF :SELECT :ADJUST PICTURE AUDIO SETUP V CHIP Basic setup Notes: • If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the TV/DVD’s operation. In such case, disconnect the AC cord once, then connect it again. • The TV section has its own menu and also DVD section has its own menu 46 . 21 J5X00301A [E] (P14-25) 21 16/3/06, 3:48 PM 22 / / / CH +/– Press or to select “TV/CABLE”. 1 2 Press MENU in the TV mode, then press or to select SETUP. Press CANCEL to clear the menu screen. 4 Press or to select “TV” or “CABLE”. 3 TV - VHF/UHF channels CABLE - Cable TV channels Cable TV chart The chart below is typical of many cable system channel allocations. TV/CABLE selection To memorize channels This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/ DVD can receive up to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CABLE selection to the TV position. When shipped from the factory, this selection is in the CABLE position. 0–9 To ADD/ERASE channels Press MENU, then press or to select SETUP. Press or to select the “CH PROGRAM”, then press . The TV will begin memorizing all the channels available in your area. Automatic memory tuning Press MENU, then press or to select 2 SETUP. Press or to select “ADD/ERASE”. 3Press or to select “ADD” or “ERASE”. 1Select the desired channel to be added or deleted using Direct channel selection (0–9) or CH +/–. Basic setup MENU SETUP LANGUAGE TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION ENGLISH CABLE ADD OFF :SELECT :ADJUST PICTURE AUDIO SETUP V-CHIP ENGLISH TV/CABLE ADD OFF SETUP LANGUAGE TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION :SELECT :ADJUST PICTURE AUDIO SETUP V-CHIP ENGLISH TV/CABLE ADD OFF SETUP LANGUAGE TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION :SELECT :ADJUST PICTURE AUDIO SETUP V-CHIP ENGLISH CABLE ADD OFF SETUP LANGUAGE TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION :SELECT :ADJUST PICTURE AUDIO SETUP V-CHIP ENGLISH CABLE ADD/ERASE OFF SETUP LANGUAGE TV/CABLE CH PROGRAM ADD/ERASE CLOSED CAPTION :SELECT :ADJUST PICTURE AUDIO SETUP V-CHIP CANCEL CANCEL Press CANCEL to clear the menu screen. 4Repeat steps 1 ~ 3 to add or erase other channel. CANCEL J5X00301A [E] (P14-25) 22 16/3/06, 3:48 PM TV operation TV operation POWER TV operation 0–9 VOL +/– TV operation Adjust the volume level by pressing VOL + or –. The volume level will be indicated on the screen by white bars. As the ...

Herunterladen

Geben Sie zwei Ziffern: