Stimmen - 2, Durchschnittliche Bewertung: 5 ( )

Hersteller: Toshiba Dateigröße: 3.66 mb Dateiname: Unterrichtssprache:

If you want to label the device, highlight EDIT LABEL, press ENTER, and then use the yzx • buttons to input the label. 3. Highlight SAVE and press ENTER to save the information. IEEE-1394 device management The IEEE-1394 device information is saved permanently in the TV’s memory. You can edit this device information (for example, to edit the device name, change the analog input information, or delete the device information from the TV’s memory if you no longer use that device). To edit the IEEE-1394 device information: 1. Press MENU and open the SETUP menu. 2. Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 3 below). Setup Installation Sleep Timer On/Off Timer Digital Tuner Hold •••••••Off Slide Show Interval •••2 Sec Convergence 3. Open the DEVICES menu, highlight IEEE-1394 DEVICES, and press ENTER. Devices IEEE1394 Devices TheaterNet Devices Note: • The TV may not recognize non-A/V or non-compatible IE EE-1394 devices; however, these devices may still be available to other compatible IEEE-1394 devices on the network. • You may be able to use the TV’s remote control to operate some compatible IEEE-1394 devices. You must first program the remote control to recognize the device (see pages 30–33). If you have an IEEE-1394 Cable box or satellite receiver, you may need to use the remote control that came with the device. 4. Highlight the device you want to edit, and follow the on-screen prompts. IEEE1394 Device Management AnalogBrand Type Label Input Connected Exit Delete All Brandname VCR None Yes Brandname STB VIDEO 2 No Brandname VCR ColorStr Yes Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. Chapter 2: Connecting your TV Chapter 2: Connecting your TV Connecting IEEE-1394 (Firewire™) video devices (cont.) IEEE-1394 device interconnection IEEE-1394 devices can be interconnected (instead of each device having to be connected to a separate input on the TV) in either of two ways: (1) a device-to-device chain connection or (2) a hub connection. Chain connection Connect the first IEEE-1394 device to one of the TV’s IEEE-1394 inputs, and then connect each subsequent device to the preceeding device in the chain. • Read the “Important information” at right. • Devices in the middle of the chain will need two IEE E-1394 ports for this connection to work as illustrated. Hub connection You can connect a chain of IEEE-1394 devices to each of the TV’s two IEEE-1394 jacks. The TV will then serve as a hub in your A/V system. Each device can send audio and video information to any other device in the system. • Read the “Important information” at right. • Devices in the middle of the chain will need two IEE E-1394 ports for this connection to work as illustrated. Important information regarding IEEE-1394 device interconnection • Do not loop the last device in the chain back to the TV. If the device chain is looped, the TV may not work properly with the other devices in the chain. • Place devices with the slowest communication speed at the end of each chain. If a device with a slower communication speed is placed ahead of a faster device in the chain, the signal from the slower device will interfere with the signal from the faster device. To determine the communication speed of an IEEE-1394 device, look for an “S” number near the device’s IEEE-1394 connector. The higher the “S” number, the faster the device. If your device is not marked with an “S” number, look in the device’s user manual or call the device manufacturer’s technical support number. • If your IEEE-1394 device has a two-position power switch, place the device at the end of the chain or leave the power switch ON at all times. If the power switch is OFF, it will interfere with signals from devices behind it in the chain. • The maximum length for an IEEE-1394 cable between each device is 15 feet. • This TV is an IEEE-1394A device. The IEEE-1394B protocol is faster and intended to allow for longer distances between devices and multi-room systems. IEEE-1394A–to–IEEE-1394B converters (available at some electronics suppliers) may allow compatibility of IE EE-1394B devices with your existing IEEE-1394A devices. Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. Chapter 2: Connecting your TV G-LINK connection This connection is necessary to enable the TV Guide On Screen™ system’s device control and one-touch recording features. After you connect your devices to the TV (pages 12–24), you will need to connect the G-LINK cable (one of the dual-wand IR blaster cables included with your TV) from your VCR and Cable box (if applicable) to the G-LINK jack on the TV. This connection is necessary to enable the following features of your TV Guide On Screen™ system: • If you have a Cable box, you need to connect the IR blaster cable from the Cable box to the G-LINK jack to receive the TV Guide On Screen system’s program listings for your Cable service. • If you have a VCR, you need to connect the ...

Herunterladen

Geben Sie zwei Ziffern: