Stimmen - 5, Durchschnittliche Bewertung: 3.4 ( )

Hersteller: Toshiba Dateigröße: 3.73 mb Dateiname: Unterrichtssprache:

You may notice a change in screen brightness when this happens. This is normal and is not a sign of malfunction (-page 57 for details). 3) Every time the TV is powered on, it may take several minutes for the picture to obtain full brightness (- “IMPORTANT NOTICE ABOUT HOT LAMP RESTART,” at right). 4) The TV’s display is manufactured using an extremely high level of precision technology; however, an occasional pixel (dot of light) may show constantly on the screen. This is a structural property of DLP® (Digital Light Processing®) technology and is not a sign of malfunction. Such pixels are not visible when the picture is viewed from a normal viewing distance. 5) Always sit approximately 10–25 feet away from the TV and as directly in front of it as possible. The picture quality may be affected by your viewing position and length of viewing time. If you sit too closely to the TV for too long, you may suffer from eye fatigue. See item 30 under “Care” on page 4. 6) Depending on the media you are viewing, it is possible, although unlikely, that a limited number of viewers may see a “rainbow effect” on the screen, which can, in rare instances, result in eye fatigue. This is a rare occurrence related to DLP® technology and is not a sign of TV malfunction. 7) This TV contains several cooling fans to moderate the internal temperature. You may be able to hear the fans for several minutes after the TV is turned off. This is a function of the Power-On Mode feature and is not a sign of TV malfunction. You can set the Power-On Mode feature to stop the fans as soon as the TV is powered off. See “Setting the Power-On Mode feature” (- page 35). 8) The yellow and blue LED lights at the bottom center of the TV front indicate your TV’s current status. If either light flashes, see “LED indications” (- page 62). 9) Every time the TV power cord is plugged in, the yellow LED will blink until the TV enters standby mode (plugged in but not powered on). This is normal and is not a sign of malfunction. “Voice announce” feature When certain non-standard conditions occur, the LEDs on the TV will blink and the TV will play a recorded “voice announcement” describing the condition (see the LED indication table on page 62 for the specific conditions that include a voice announcement). To repeat the voice announcement and hear additional information, press the MENU button on the TV while the LEDs are blinking. IMPORTANT NOTICE ABOUT HOT LAMP RESTART When the TV has been powered on long enough for the lamp unit to get hot, it may take several minutes for the picture to appear in the following situations: • When the Power-On Mode feature is set to Power- Saving and you turn the TV off and then on again within a few minutes; or • If the TV is on when a short-term power failure, power surge, or other similar power failure occurs, such that the TV loses and regains power within a few minutes. This is a property of DLP® TV lamp technology and is NOT a sign of malfunction. If this occurs, the yellow LED on the TV front panel will blink (and the blue LED will be lit solid) until the TV is finished restarting the lamp and the normal picture appears. If both LEDs are blinking, you will need to turn the TV off and then on again to restart the lamp. Trademark Information • WOW, SRS and l symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. • HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. •DLP® and the DLP logo are registered trademarks of Texas Instruments. 6 HM67 (E/F) Web 213:276 50HM67_EN.book Page 7 Thursday, March 29, 2007 11:28 AM Contents Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Welcome to Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Features of your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Overview of steps for installing, setting up, and using your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 TV front and side panel controls and connections . . . . . . . . 11 TV back panel connections . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Chapter 2: Connecting your TV . . . . . . . . . . . . . . . . . . . . . . .13 Overview of cable types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 About the connection illustrations . . . . . . . . . . . . . . . . . . . . 13 Connecting a VCR and antenna or Cable TV (no Cable box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Connecting a VCR with S-video and a cable box . . . . . . . . 15 Connecting a DVD player with ColorStream® (component video), a VCR, and a satellite receiver. . . . 16 Connecting a device to the IR OUT infrared terminal using the IR blaster cable for IR pass-through device con...

Herunterladen

Geben Sie zwei Ziffern: