Stimmen - 4, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Toshiba Dateigröße: 7.45 mb Dateiname: Unterrichtssprache:

1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Noise Reduction. Press OK . 3 Press B or b to highlight MPEG NR. 4 Press C or c to select either Low, Middle, High, or Off. Press . Note: If the Picture Mode is set to Game or PC, this feature is not available. DNR DNR lets you soften the screen representation of a weak signal to reduce the noise effect. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Noise Reduction. Press OK . 3 Press B or b to select DNR. 4 Press C or c to select Low, Middle, High, Auto, or Off. Press . Note: • If the Picture Mode is set to Game or PC, this feature is not available. • The differences may not always be noticeable. For the best results, use lower settings, as picture quality may be greatly reduced if the setting is too high. Auto Brightness Sensor When the Auto Brightness function of Auto Brightness Sensor Settings is set to On, the TV optimizes the backlighting levels to suit ambient light conditions. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Auto Brightness Sensor Settings. Press OK . 3 Press B or b to select Auto Brightness Sensor. 4 Press C or c to select On or Off. Press . Note: When the Picture Mode is set to AutoView, this feature is automatically set to On and will not be available. Backlight Adjustment Pro This feature adjusts the backlight so that it can change to match the ambient light conditions. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Auto Brightness Sensor Settings. Press OK . 3 Press B or b to select Backlight Adjustment Pro. Press OK . The Backlight Control Level screen appears. 4 Press OK to display the adjustment window. Press C or c to select the point. Press B or b to adjust the level. The adjustment range is from 0 to 100. Backlight Adjustment Pro 100 0 Backlight Control Level Control Level Ambient Light 37 Cancel Reset 5 Press OK to fix the adjustment. To cancel the adjustment when selecting a point, select Cancel on the screen. To reset the adjustments of all points to the factory defaults, select Reset on the screen. Press OK . Note: If the Auto Brightness Sensor is set to Off, this feature will not be available. Chapter 7: Picture and sound controls Chapter 7: Picture and sound controls ColorMaster™ The ColorMaster™ feature allows you to adjust standard colors. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select ColorMaster, press C or c to select On. Press . Base Color Adjustment When ColorMaster™ is set to On, the list of base colors appears. You can select a base color to adjust. 1 > Settings > PICTURE > Advanced Picture Settings > OK . 2 Press B or b to select Base Color Adjustment. Press OK . The Base Color Adjustment screen appears. 3 Press B or b to select a color. Press c. 4 Press C or c to select Hue, Saturation, or Brightness. 5 Press B or b to adjust the setting. 6 Repeat Steps 3 thro...

Herunterladen

Geben Sie zwei Ziffern: