Stimmen - 4, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Toshiba Dateigröße: 5.55 mb Dateiname: Unterrichtssprache:

• 1366 x 768 output resolution. • Two HDMI® digital, high-definition multimedia interfaces 1080p input support (. page 16). • One set of ColorStream® HD high-resolution component video inputs (. page 15). This is used by setting the AV input mode to ColorStream HD (. page 26). • Digital Audio Out optical audio connection with Dolby® Digital optical output format (. page 39). • CableClear® digital picture noise reduction (. page 52). • PC IN (Analog RGB) computer terminal (. pages 18-19). • REGZA-LINK allows control of external devices from the TV remote via HDMI connection(. page 48). • Media Player allows you to view photo files and to play music files.(. page 44). Chapter 1: Introduction 10 Overview of steps for installing, setting up, and using your new TV Follow these steps to set up your TV and begin using its many exciting features. 1 Carefully read the important safety, installation, care, and service information. Keep this manual for future reference. 2 Observe the following when choosing a location for the TV: • Read “Important notes about your LCD TV” (. page 7). • Place the TV on the floor or a sturdy, level, stable surface that can support the weight of the unit. Secure the TV to a wall, pillar, or other immovable structure (. page 4). • Place the TV in a location where light does not reflect on the screen. • Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY. 3 Do not plug in any power cords until AFTER you have connected all cables and devices to your TV. 4 BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and controls (. pages 11–12). 5 Connect your other electronic device(s) to the TV (. pages 13–19). 6 Install the batteries in the remote control (. page 20). 7 See “Learning about the remote control” (. page 21) for an overview of the buttons on the remote control. 8 AFTER connecting all cables and devices, plug in the power cords for your TV and other devices. Then press POWER on the TV control panel or remote control to turn on the TV. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn the TV off or on, please unplug the power cords few seconds then re-plug to try again. 9 See “Menu layout and navigation” for a quick overview of navigating the TV’s menu system (. page 22). 10 Program channels into the TV’s channel memory (. page 24). 11 For details on using the TV’s features, see Chapters 6 and 7. 12 For help, refer to the Troubleshooting Guide, Chapter 8. 13 For technical specifications and warranty information, see Chapter 9. 14 Enjoy your new TV! Chapter 1: Introduction 11 TV front and side panel controls and connections Model 26SL400U is used in this manual for illustration purposes. 2 1 4 8 9 10 5 6 7 3 1. Green LED Power LED(Green) = Power indicator 2. Remote sensor — Point the remote control toward this remote sensor (. “Remote control effective range” on page 20). 3. USB port — To access photo or music files. 4. POWER — Press to turn the TV on and off. If the TV stops responding to the controls on the remote control or TV control panel and you cannot turn off the TV, please unplug the power cord few seconds then re-plug to try again. 5. ARROWS pq +- — When a menu is on-screen, these buttons function as up/down/left/right menu navigation buttons. 6. MENU (ENTER) — Press to access the menu system (. pages 22–23). When a menu is onscreen, the MENU button on the TV’s control panel functions as the ENTER button. 7. EXIT — Press to instantly close an on-screen menu. 8. CHANNEL pq — When no menu is on-screen, these buttons change the channel (programmed channels only; . page 24). 9. VOLUME +- — These buttons adjust the volume level. 10. INPUT — Repeatedly press to change the source you are viewing (ANT/CABLE, ColorStream HD, HDMI 1, HDMI 2, PC). TV front TV top Left side panel TV back panel connections For an explanation of cable types and connections, see pages 13–19. 1. PC IN — For use when connecting a personal computer. 2. PC/HDMI-1 (AUDIO) IN — PC audio input terminal is shared with HDMI-1 analog audio input terminal, and its use can be configured in the Audio Setup menu (. page 43). 3. ColorStream® HD / VIDEO IN — These include standard A/V connections. These are switched by AV input mode (. page 26). Note: Component / Standard (composite) video cables carry only video information; separate audio cables are required for a complete connection. 4. HDMI® IN — High-Definition Multimedia Interface input receives digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device. HDMI connection is necessary to receive 1080p signals. 5. ANT/CABLE — Input that supports analog (NTSC) and digital (ATSC) off-air antenna signals and analog and digital Cable TV (QAM) signals. 6. Digital Audio O...

Herunterladen

Geben Sie zwei Ziffern: