Stimmen - 1, Durchschnittliche Bewertung: 5 ( )

Hersteller: Toshiba Dateigröße: 6.07 mb Dateiname: Unterrichtssprache:

Note: • If you select one of the factory-set picture modes (Sports, Standard, Movie or PC) and then change the Film Stabilization setting, the picture mode automatically changes to Preference. • When ClearFrame is set to Off, Film Stabilization will be grayed out and set to Off automatically. • When slow motion video is present the units will treat any scrolling text as Film and may cause a slight jitter of the scrolling text. Tuning Off the Film Stabilization feature will correct this issue. Using CableClear® digital noise reduction The CableClear® digital noise reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To change the CableClear settings: and open the Picture menu, highlight Noise Reduction and press .2. In the CableClear field, select your desired setting. 1. Press Note: • If the current input is ANT/CABLE, VIDEO, the menu will display the text “CableClear.” The available selections are Off, Low, Middle, and High. • If the current input is ColorStream HD, HDMI 1, HDMI 2 or HDMI 3 (only for G310U1), the menu will display the text “DNR.” The available selections are Off, Low, Middle, and High. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively. (continued) 3. To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Using MPEG noise reduction The MPEG noise reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled (“grayed out”). To select the MPEG noise reduction level: and open the Picture menu. 1. Press 2. Highlight Noise Reduction and press . 3. Press • or • to highlight the MPEG Noise Reduction field, and then press • or • to select either Off, Low, Middle or High. 4. To save the new settings, highlight Done and press . To revert to the factory defaults, highlight Reset and press . Using the Game Mode feature You can use the Game Mode feature for shorter frame delays when playing a video game requiring split-second timing between the on-screen display and input from the controller (such as music creation and high-action games). This feature is more effective for 480i and 1080i input signals. Note: To use the Game Mode feature, the current video input must be Video, ColorStream HD, HDMI 1, HDMI 2 or HDMI 3 (only for G310U1). The Game Mode cannot be turned on when any other video input is selected. To turn on Game Mode: and open the Picture menu, then highlight Game Mode. 1. Press 2. Press • or • to select On. To turn off Game Mode: Select Off in Step 2 above, change the video input, or turn the TV off and then on again. Note: You can change the video input by ...

Herunterladen

Geben Sie zwei Ziffern: