Stimmen - , Durchschnittliche Bewertung: ( )

Anleitung Toshiba, modell 32RV530U

Hersteller: Toshiba
Dateigröße: 3.53 mb
Dateiname:

Unterrichtssprache:

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Das Dokument wird geladen, bitte warten

HerunterladenSchließen

Dieses Gerät hat auch andere Anweisungen:

Fernseher - 32RV530U (3.28 mb)

– To display an 1080p/60Hz signal format, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly. – HDMI cable transfers both video and audio. Separate analog audio cables are not required (see illustration). – See “Setting the HDMI™ audio mode” (-page 32). To view the HDMI device video: Select the HDMI 1, HDMI 2, HDMI 3, or HDMI 4 video input source on the TV.* * To select the video input source, press INPUT on the remote control (-page 21). To program the TV remote control to operate other devices, see Chapter 3. To connect a DVI device, you will need: • one HDMI-to-DVI adapter cable (HDMI type A connector) per DVI device – For proper operation, the length of an HDMI-to-DVI adapter cable should not exceed 9.8 ft (3m). The recommended length is 6.6 ft (2m). • one pair of standard analog audio cables per DVI device – An HDMI-to-DVI adapter cable transfers video only. Separate analog audio cables are required (see illustration). – See “Setting the HDMI™ audio mode” (-page 32). Note: To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures: • When turning on your electronic components, turn on the TV first, and then the HDMI or DVI device. • When turning off your electronic components, turn off the HDMI or DVI device first, and then the TV. [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of highdefinition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the TV. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. VIDEO AUDIO L R L R IN OUT IN HDMI OUT HDMI device TV upper back panel TV right side panel VIDEO AUDIO L R L R OUT IN DVI/HDCP OUT IN DVI device TV upper back panel Chapter 2: Connecting your TV Chapter 2: Connecting your TV REGZA-LINK connection You can control the basic functions of connected audio/video devices using the TV’s remote control if you connect a REGZA-LINK compatible audio receiver or playback device. For an explanation of setup and operations, see pages 51 and 52. VIDEO AUDIO L R RL IN HDMI OUT HDMI IN HDMI OUT HDMI OUT VIDEO AUDIO L R RL OUT IN VIDEO AUDIO L R RL OUT IN Audio receiver TV upper back panel TV right side panel Playback device (REGZA-LINK DVD player,etc.) Playback device (REGZA-LINK DVD player,etc.) To connect an Audio Receiver and Playback Devices, you will need: • HDMI cables (- page 16) Note: • If several devices are connected, REGZA-LINK feature may not operate properly. • For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ). Before controlling the device(s): • After completing the above connections, set the REGZALINK Setup menu as you desire (- page 52). • The connected devices must also be set. For details, see the operation manual for each device. • The REGZA-LINK feature uses the CEC technology as regulated by the HDMI standard. • This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to the individual instruction manuals for compatibility information. 18 Chapter 2: Connecting your TV Connecting a digital audio system The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®* Digital g or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby® Digital decoder or other external audio system with optical audio input. You will need: • optical audio cable (Use an optical audio cable that has the larger “TosLink” connector and not the smaller “minioptical” connector.) To control the audio: 1 Turn on the TV and the digital audio device. 2 Press Y on the TV’s remote control and open the Audio menu. 3 Highlight Audio Setup and press T. 4 In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device (- “Selecting the optical audio output format” on page 46). Note: • Some audio systems may not be compatible with Dolby Digital bitstream signals. Older audio systems that are not compatible with standard optical out signals may not work properly, creating a high noise level that may damage speakers or headphones. THIS DAMAGE IS NOT COVERED BY YOUR WARRANTY. • The DIGITAL AUDIO OUT terminal may not output some digital audio sources because of copy restrictions. * Manufactured under license from Dolby Laboratories. Dolby, and the double-D symbol are registered trademarks of Dolby Laboratories. Connecting an audio system This connection allows you to use external speakers with an external analog audio amplifier to adjust the sound level. You will need: • standard audio cables To control the audio: 1 Turn on the TV and the stereo amplifier. 2 Minimize the sound volume from the TV’s built-in speakers and control the volume level using the amplifier’s remote control. LINE IN ...