Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: Toshiba Dateigröße: 1.77 mb Dateiname: Unterrichtssprache:

To control the audio through the amplifier, use the audio system’s remote control. Amplifier Back of TV LINE IN L R Connecting a camcorder This connection allows you to watch video materials recorded on a camcorder. VIDEO AUDIO OUT L R Camcorder VIDEO 2 (side panel) F Note: S Set the TV’s volume to the minimum level if necessary. Introduction Note: If you have a camcorder with S-video, use an S-video cable instead of a standard video cable for better picture performance. Using theremote control Setting upyour TV Using the TV’sFeaturesAppendixIndex Connectingyour TV 15 Connecting a personal computer (PC) This connection allows you to view the image of a personal computer (PC) on the TV screen. When connecting a PC to the TV, use an analog RGB (15-pin) computer cable and a PC audio cable. –To use a PC, set the monitor output resolution on the PC before connecting it to the TV. The following signals can be displayed. •XGA: VESA 1024 . 768 @ 60Hz Other formats or non-standard signals may not be displayed correctly. –To display the optimum picture, use the PC setting feature. (see “Using the PC setting feature” on page 37). Back of TV Note: • Some PC models cannot be connected to this TV. • An adapter is not needed for computers with a DOS/V compatible mini D-sub 15-pin terminal. • Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes. Connectingyour TV Computer Audio output Audio cable RGB/PC output Conversion adapter (if necessary) 16 E Using the remote control Learning about the remote control POWER turns the TV on and off (standby mode*) MUTE turns off the sound (page 34) DISPLAY displays TV settings on-screen (page 38) or closes the on-screen menu (page 26) INPUT selects the video input source (page 26) Channel Numbers (0-9, 100) allow direct access to channels (page 25) CH RTN switches between the last two viewed channels (page 26) TV selects TV mode (page 20) VCR selects VCR mode (page 19) CBL/SAT selects CBL/SAT mode (page 19) DVD selects DVD mode (page 20) VOL (volume) + - adjusts the volume level CH (channel) cycles through programmed channels (page 24) PIC SIZE cycles through the five picture sizes: Natural, TheaterWide 1/2/3, and Full (page 27) SLEEP sets the TV to turn off at a specific time (page 33) yzx • (arrow buttons) select or adjust menu items (page 23) y [arrow button] selects stereo or SAP sound (page 34) FAV yz cycle through channels you programmed as favorite channels (page 25) MENU/ENTER accesses the menu system; also sets menu selections (page 23) EXIT returns to the previous on-screen menu (page 23) F S SKIP/ SEARCH SKIP/ SEARCH CLEARREC TV/VCRTOP MENU REV FF PAUSE PLAY STOP ENTER EXIT FAV FAV SLEEP PIC SIZE MENU/ ENTER DVD MENU CBL/SAT DVD TV VCR +10 CH RTN INPUT DISPLAY MUTE POWER ENT First press TV to control the TV. *The TV is in standby mode when the power is OFF but the power cord is still plugged into an outlet. Note: The error message “Not Available” will appear if you press a key for a function that is not available. Setting upyour TV Using the TV’sFeaturesAppendixIndex IntroductionConnectingyour TV Using theremote control 17 Using theremote control Using theremote control Installing the remote control batteries To install the batteries: 1. Open the battery cover on the back of the remote control. 2. Install two batteries (R03 size “AAA”). Match the + and – signs on the batteries to the signs on the battery compartment. 3. Replace the battery cover on the remote control until the lock snaps. Remote control effective range Caution: Never throw batteries into a fire. Note: • Be sure to use AAA size batteries. • Dispose of batteries in a designated disposal area. • Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with applicable laws and regulations. • If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with new ones. • When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix battery types or use new and used batteries in combination. • Always remove batteries from remote control if they are dead or if the remote control is not to be used for an extended period of time. This will prevent battery acid from leaking into the battery compartment. 18 E Using the remote control to operate your other devices To control a cable TV converter/satellite receiver: Program the remote control to recognize the brand of your cable TV converter/satellite receiver (see “Programming the remote control to operate your other devices” on page 20). The buttons shown at right will control the cable TV converter/ satellite receiver. Press CBL/SAT first. SKIP/ SEARCH SKIP/ SEARCH CLEARREC TV/VCRTOP MENU REV FF PAUSE PLAY STOP ENTER EXIT FAV FAV SLEEP PIC SIZE MENU/ ENTER DVD MENU CBL/SAT DVD TV VCR +...

Herunterladen

Geben Sie zwei Ziffern: