Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Toshiba Dateigröße: 1.4 mb Dateiname: Unterrichtssprache:

28 Limited United States Warranty ..................................... 29 Limited Canada Warranty .............................................. 30 Index .......................................................................... 31 5 Introduction Introduction Welcome to Toshiba Congratulation! You have purchased one of the finest TFT LCD TV’s on the market! This manual will help you use the many exciting and useful features to make your TV viewing more enjoyable than before. Before operating your TV set, please read all these safety and operating instructions completely and then retain for future reference. Exploring your new TV You can operate your TV by using the buttons on the Top panel or the remote control. The Side and back panels provide terminal inputs for connecting other equipment to your TV. POWER CHANNEL zyVOLUME x• TV/VIDEO Front Headphones Jack AUDIO OUT VIDEO- 2 Remote Sensor Back Customer’s Record You will find the model number and serial number on the back of your TV set. Record these numbers in the spaces prided below. Refer to them whenever you call upon your TOSHIBA dealer regarding this product. Model Number Serial Number Remote Control To remove the cover, pull the bottom of the cover toward you VIDEO- 1 DC input 6 Selecting a location for the TV E Note: Before installing your TV, Please read the important safety information on pages 2-4. F •Place the TV on the floor or a sturdy, levels stable surface. The LCD panel can be made to S •Place the TV in a location where light does not directly hit incline forward and backward. the screen. 15° 5° •Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. Connecting the power cord and AC adaptor Front Back of TV Power cord (supplied) Wall outlet Using theConnecting Index Appendix Introduction Remote Control your TV Adaptor (supplied) Connecting your TV Note: Cables are not supplied with your TV. . Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses “F” connectors. . Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV’s standard A/V inputs are color-coded in the same manner as the cables. . S-Video cable is for use with video equipment that has S-Video connectors. . Component video cables come in sets of three (typically color-coded red, green, and blue), and are for use with video equipment that has component video connectors. Your TV’s ColorStream® (component video) inputs are color-coded in the same manner as the cables. NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: . For GOOD picture quality: Use a standard yellow video cable. . For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. (You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable.) Setting upyour TV Using the TV’sFeaturesComponent video cables (typically color-coded red, green, blue) Coaxial (antenna) cable Standard stereo A/V cables (typically color-coded yellow for video, red and white for audio) S-video cable CAUTION: . For BEST picture quality: If your equipment has component video Do not plug in any power cords connectors, use component video cables instead of a standard yellow video until you have finished connecting all cable or S-video cable. (You still must connect the standard red and white audio cables for full system connection.) equipment. 7 Connecting your TV Connecting a VCR This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV, and record from one channel while watching another channel. VCR From antenna or Cable Back of TV IN from ANT VIDEO AUDIO OUT to TV CH 3 L R CH 4 IN OUT Connecting a cable converter box This connection allows you to watch basic and premium cable channels. Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and use the converter box to change channels. Back of TV Cable converter box IN OUT From Cable Connecting a cable converter box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. Set the TV signal source to VIDEO 1(page 22). Tune the VCR to channel 3 or 4 (the same channel as the converter box output switch), and use the cable converter box to change channels. VCR From Cable IN from ANT VIDEO AUDIO OUT to TV CH 3 L R CH 4 IN OUT Cable converter box IN OUT Back of TV Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. If you have an S-VHS VCR, use an S-video cable (in the S-video jacks) instead of t...

Herunterladen

Geben Sie zwei Ziffern: