|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Owner’s Manual Batteries Remote Control Power Cord Polishing Cloth Polishing cloth for use on the screen. This item is not included for all models. * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration. POWER TV/RAD RA RATIOTIO AV V MODE MARK FAV Cable management clip Ferrite Core (This item is not included for all models.) Protection Cover Install the power plug closely. Use of ferrite core (This feature is not available for all models.) Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is. x 8 Bolts for stand assembly (Except for 55SL8***) Wall Mounting Bracket(Separate purchase) (32SL8***) RW230 (32/37/42/47SL8***) AW-47LG30M AW-55LH40M (55SL8***) Cable Holder 12mm 12mm Use screws 12mm(+0.5/-0.5) long on the SET assembly side. (Only 37/42/47SL8***) Set assembly side (without guide spacer) Set assembly side (with guide spacer) Guide spacer PREPARATION FRONT PANEL CONTROLS FRONT PANEL CONTROLS NOTE ! G TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. PREPARATION G When the TV cannot be turned on with the remote control, press the main power button on the TV. (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control). G Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. G Do not drag the TV. The floor or the product may be damaged. CAUTION ¦ Image shown may differ from your TV. Main Power Switch OFF ON INPUTMENUOKP PROGRAMME VOLUME MENUOK INPUT POWER (Only 37/42/47/55SL8***) Main Power Switch OFFON (Only 32SL8***) Intelligent Sensor Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator • Illuminates red in standby mode. • Illuminates blue when the TV is switched on. BACK PANEL INFORMATION A Image shown may differ from your TV. PREPARATION AV IN 3 L/ MONO RAUDIOAUDIOVIDEOVIDEO 11 1 HDMI / DVI IN 3 2 1(DVI) H/P (RGB) 2 43 75 6 108 9 HDMI IN 4 12 13 2 1 2 3 4 5 6 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (G GG p.106~107) Never attempt to operate the TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. RGB IN Input Connect the output from a PC. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode. Headphone Socket Plug the headphone into the headphone socket. Component Input Connect a component video/audio device to these jacks. 7 8 9 10 11 12 13 Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. RGB/DVI Audio Input Connect the audio from a PC or DTV. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. Antenna Input Connect antenna or cable to this jack. Audio/Video Input Connect audio/video output from an external device to these jacks. USB Input Connect USB storage device to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot Insert the CI Module to P PPC CCM MMC CCI IIA AA C CCA AAR RRD DD S SSL LLO OOT TT. .. (This feature is not available in all countries.) A-4 PREPARATION PREPARATION STAND INSTALLATION (Except for 55SL8***) 1 3 4 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Stand Base of the TV. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. Stand Body Stand Base ¦ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. BACK COVER FOR WIRE ARRANGEMENT ¦ Image shown may differ from your TV. Install the CABLE MANAGEMENT CLIP as shown. 1 CABLE MANAGEMENT CLIP Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 2 ! NOTE GDo not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cab...
Dieses Handbuch ist für folgende Modelle:Fernseher - 47SL8000 (7.44 mb)
Fernseher - 47SL9500 (7.44 mb)
Fernseher - 55SL8500 (7.44 mb)
Fernseher - 42SL9000 (7.44 mb)