Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
4 Hold the Stand Body and bend it upward. 5 Pull stand body to separate from the TV during pressing 2 latches. ¦ Image shown may differ from your TV. PREPARATION PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. ¦ You should purchase necessary components to fix the TV to the wall on the market. ¦ Position the TV close to the wall to avoid the possibility of it falling when pushed. ¦ The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. PREPARATION 2 1 2 1 1 2 Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. 3 3 Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV. ! NOTE G When moving the TV undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. BACK COVER FOR WIRE ARRANGEMENT PLASMA TV Models Connect the cables as necessary. To connect additional equipment, see the E EEx xxt tte eer rrn nna aal ll E EEq qqu uui iip ppm mme een nnt tt S SSe eet ttu uup pp section. PREPARATION 2 Install the C CCA AAB BBL LLE EE M MMA AAN NNA AAG GGE EEM MME EEN NNT TT C CCL LLI IIP PP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables. (Only 42/50PG10**) (Only 42/50PG20**, 42/50/60PG30**) CABLE MANAGEMENT CLIP CABLE MANAGEMENT CLIP CABLE HOLDER CABLE HOLDER How to remove the cable management clip Hold the C CCA AAB BBL LLE EE M MMA AAN NNA AAG GGE EEM MME EEN NNT TT C CCL LLI IIP PP with both hands and pull it upward. * For the 42PG10** model, press the center of the CABLE MANAGEMENT CLIP and then lift up it. (Only 42/50PG10**) (Only 42/50PG20**, 42/50/60PG30**) 16 PREPARATION PREPARATION LCD TV Models: 32/37/42LG20**, 26/32/37/ 42LG30**, 32/42LG32**, 32/37/42/47/52LG5*** Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual. 1 Open the CABLE MANAGEMENT CLIP as shown and manage the cables. 2 CABLE MANAGEMENT CLIP Fit the CABLE MANAGEMENT CLIP as shown. 3 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 1 2 Install the CABLE MANAGEMENT CLIP as shown. First, press the cable management. Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward. ! NOTE G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. How to remove the cable management clip (LCD TV Models : 19/22LS4D*) LCD TV Models : 19/22LS4D* LCD TV Models : 19/22LG30** Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual. PREPARATION 2 Install the CABLE MANAGEMENT CLIP as shown. CABLE MANAGEMENT CLIP How to remove the cable management clip G GG Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward. ! NOTE G GG Do not use the CABLE MANAGEMENT CLIP to lift the TV. -If the TV is dropped, you may be injured or the TV may be damaged. PREPARATION POSITIONING YOUR DISPLAY (Only 19/22LG30**, 19/22LS4D*) • Tilt range ¦ Image shown may differ from your TV. ¦ Adjust the position of the panel in various ways for maximum comfort. PREPARATION 10~12 30 LOCATION (Only 19/22LG30**, 19/22LS4D*) Position your TV so that no bright light or sunlight falls directly onto the screen. Care should be taken not to expose the tv to any unnecessary vibration, moisture, dust or heat. Also ensure that the TV is placed in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover. If you intend to mount the TV to a wall, attach VESA standard mounting interface (optional parts) to the back of the TV. When you install the TV to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. KENSINGTON SECURITY SYSTEM (Only 19/22LG30**, 19/22LS4D*) The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington Security System cable as shown below. For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with the Kensington Security System. For further information, contact the internet homepage of the Kensington company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD projectors....
Dieses Handbuch ist für folgende Modelle:Fernseher - 32LG3200 (4.77 mb)
Fernseher - 32LG5000.AEU (4.77 mb)
Fernseher - 32LG5020 (4.77 mb)
Fernseher - 37LG5000 (4.77 mb)