Stimmen - 5, Durchschnittliche Bewertung: 4.2
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Fernseher - 32LM640T (20.03 mb)
Fernseher - 32LM640T (9.02 mb)
Anleitung Zusammenfassung
CAUTiON • Avoid touching the screen at all times, as this may result in damage to the screen. • It is recommended to move the TV in the box or packing material that the TV originally came in. • Before moving or lifting the TV, disconnect the power cord and all cables. • When holding the TV, the screen should face away from you to avoid damage. • Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. • When transporting a large TV, there should be at least 2 people. • When transporting the TV by hand, hold the TV as shown in the following illustration. • When transporting the TV, do not expose the TV to jolts or excessive vibration. • When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. • Whenever you handle TV, Protection pad should be covered with side of TV. (Depending on model) Protection Pad 18 ENEGNLGISH ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall for proper ventilation. 2 Connect the power cord to a wall outlet. CAUTION yy Do not place the TV near or on sources of heat, as this may result in fire or other damage. 10 cm 10 cm 10 cm 10 cm Securing the TV to a table Fix the TV to a table to prevent from tilting forward, damage, and potential injury. To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand. (Only 32/37/42LS57**, 32/42/47LM669*) (Only 32/37LM62**, 32LM64**, 32LM660*) . M4 x 8 2EA NOTE (Only 32/37LM62**, 32LM64**, 32LM660*) How to fix the TV to a table 1. Connect the Desk-mount Cables to the Stand Base using the Bracket Screws. 2. Fix the Desk-mount Cables to a table using the Desk-mount Screws. 3. Once the TV is fixed, move the table close to the wall. Children may go in, causing injuries. WARNING yy To prevent TV from falling over, the TV should be securely attached to the floor/ wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury. 19 ENGENGLiSh ASSEMBLING AND PREPARING Securing the TV to a wall (This feature is not available for all models.) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV. -If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flatsurface. CAUTiON yMake sure that children do not climb on or hang on the TV. NOTE yUse a platform or cabinet that is strong and large enough to support the TV securely. yBrackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer. Adjusting the angle of the TV to suit view (This feature is not available for all models.) Adjusting the angle of the TV to suit view Swivel 20 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 32/37/42LS57**, 65LM62**, 32/42/47LM669*, 42/47/55LM765*) 2020Swivel 10 degrees to the left or right and adjust the angle of the TV to suit your view. (Only 32/37/42/47/55LM62**, 32/42/47/55/60LM64**, 32/42/47/55LM660*, 42/47/55LM67**, 42/47/55LM760*, 42/47/55LM761*) 1010 CAUTiON When adjusting the angle of the product, watch out for your fingers. »Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury. (Only 32/37/42/47/55LM62**, 32/42/47/55/60LM64**, 32/42/47/55LM660*, 42/47/55LM67**, 42/47/55LM760*, 42/47/55LM761*)
Fernseher - 32LM640S (13.65 mb)
Fernseher - 32LM669S (13.65 mb)
Fernseher - 42LM670S (13.65 mb)
Fernseher - 42LM761S (13.65 mb)