Stimmen - 4, Durchschnittliche Bewertung: 4
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
This item is not included for all models. * Lightly wipe any stains orfingerprints on the surfaceof the TV with the polish- ing cloth. Do not use excessive force. This may cause scratching or discoloura- tion. Ferrite Core (This item is not included for all models.) Use of ferrite core (This feature is not available for all models.) Bolts for stand assembly 1-screw for stand fixing(Only 32/37/42LD4***, 26/32LD32**, 26/32LD33**) x 8 (M4x20) (Only 32/37/ 42/47LD45**) Protection Cover x 4 (M4x24) (Only 32/37/ 42/47LD42**, 26/32LD32**, 26/32LD33**) or Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is. Install the power plug closely. FRONT PANEL CONTROLS NOTE >TV can be placed in standby mode in order to reduce the power consumption. And TV should be switched off using the power switch on the TV if it will not be watched for some time, as this will reduce energy consumption. >The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost. PREPARATION CAUTION >Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of glass, or the TV may fall. >Do not drag the TV. The floor or the product may be damaged. Only 32/37/42/47LD45** ¦Image shown may differ from your TV. PROGRAMME VOLUME OK MENU INPUT POWER Remote Control Sensor Power/Standby Indicator • Illuminates red in standby mode. • Illuminates blue when the TV is switched on. SPEAKER PREPARATION Only 32/37/42/47LD42**, 26/32LD32**, 26/32LD33** PREPARATION Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode. Illuminates blue when the TV is switched on. SPEAKER PROGRAMME VOLUME OK MENU INPUT POWER Only 32/37/42/47LD42**, 32LD32**, 32LD33** VOLUMEMENUPOWER Only 26LD32**, 26LD33** PROGRAMMEOKINPUT BACK PANEL INFORMATION PREPARATION ¦ Image shown may differ from your TV. 1 1 2 3 4 5 6 7 98 10 11 2 12 13 1 2 3 4 5 6 Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. (> p.137 to 147) Never attempt to operatethe TV on DC power. HDMI/DVI IN Input Connect an HDMI signal to HDMI IN. Or DVI(VIDEO) signal to HDMI/DVI port with DVI toHDMI cable. OPTICAL DIGITAL AUDIO OUT Connect digital audio to various types of equipment. Connect to a Digital Audio Component. Use an Optical audio cable. RGB/DVI Audio Input Connect the audio from a PC or DTV. Euro Scart Socket (AV1) Connect scart socket input or output from anexternal device to these jacks. Component Input Connect a component video/audio device tothese jacks. 7 8 9 10 11 12 13 RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode. RGB IN Input Connect the output from a PC. Antenna Input Connect antenna or cable to this jack. USB Input Connect USB storage device to this jack. PCMCIA (Personal Computer Memory Card International Association) Card SlotInsert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.) Headphone Socket Plug the headphone into the headphonesocket. Audio/Video Input Connect audio/video output from an externaldevice to these jacks. PREPARATION STAND INSTALLATION ¦ Image shown may differ from your TV When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. PREPARATION Only 32/37/42/47LD45** 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Cover Base of the TV. Stand Body 3 Cover Base Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. 4 Only 32/37/42/47LD42**, 26/32LD32**, 26/32LD33** 1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. 2 3 Fix the 4 bolts securely using the holes in the back of the TV. BACK COVER FOR WIRE ARRANGEMENT ¦Image shown may differ from your TV. NOTE >Do not use the Cable Management Clip to lift the TV. -If the TV is dropped, you may be injured or the TV may be damaged. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 1 Open the Cable Management Clip as shown. 2 Cable Management Clip Fit the Cable Management Clip as shown.3 NOTE >Do not use the Cable Management Clip to lift the TV. -If the TV is dropped, you may be injured or the TV may be damaged. Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. 1 Open the Cable Management Clip as shown. 2 Cable Management Clip Fit the Cable Management Clip as sh...
Dieses Handbuch ist für folgende Modelle:Fernseher - 19LE3400 (4.74 mb)
Fernseher - 26LD335 (4.74 mb)
Fernseher - 26LD351 (4.74 mb)
Fernseher - 26LE3300 (4.74 mb)