Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
On screen menus The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Press the MENU button and then D DD / E EE button to display each menu. 2. Press the G GG button and then D DD / E EE button to select a menu item. 3. Press the G GG button to display the sub menu or the pull-down menu. 4. Change the setting of an item in the sub or pull-down menu with F FF / G GG or D DD / E EE. You can move to the higher level menu with OK or F FF button and to move to the lower level menu press the G GG button. Note : In some models, Language, Blue back, Game, Booster will not display in the Special menu. Setting up TV stations Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. System{ Storage{ Normal{ Turbo{ System{BGIDKM ( )O}i{OOKOMENU BG : (Asia/New Zealand/M.East/Africa/ Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Option: In some models, you can only select Start. Note : a.Turbo is faster than Normal and in some models, these searches will automatically s tore all receivable stations. b.If the programmed station has poor quality sound, select the system again in the Manual menu. Auto programme scan To automatically scan the pictures of stored programmes, press the D DD or E EE button for about 3 seconds. The picture of stored programmes appears on the screen one by one. To stop auto programme scanning, press any button except VCR buttons. Manual programme tuning Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. Booster (option) If the reception is poor at the fringe area of TV signal, select Booster to On. When the picture condition is good, do not select Booster to On. Programme edit DeleteOOOCopyMoveOOOOOSkipOOOOCO1DOOOO5OOSO69O1OOCO03OOOO6OOSO17O2OOCO12OOOO7OOSO22O3OOSO66OOOO8OOCO09O4OOSO67OOOO9OOCO11)O}i{OOKOMENU( Deleting a programme 1. Select a programme to be deleted with the D DD / E EE or F FF / G GG button. 2. Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. Copying a programme 1. Select a programme to be copied with the D DD / E EE or F FF / G GG button. 2. Press the GREEN button. All the following programmes are shifted down one position. Moving a programme 1. Select a programme to be moved with the D DD / E EE or F FF / G GG button. 2. Press the YELLOW button. 3. Move the programme to the desired programme number with the D DD / E EE or F FF / G GG button. 4. Press the YELLOW button again to release this function. Skipping a programme number 1. Select a programme number to be skipped with the D DD / E EE or F FF / G GG button. 2. Press the BLUE button. The skipped programme turns to blue. 3. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D DD / E EE button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Repeatedly press the MENU button to return to normal TV viewing. Favourite programme This function lets you select your favourite programmes directly. AutoOprog.{ Manual{ Prog.Oedit{ Favourite{ 560C005 ()O}i{O0_9OOKOMENU Calling the programme table You can check the programmes stored in the memory by displaying the programme table. Note : a.You may find some blue programmes. They have been set up to be skipped by auto pro gramming or in the programme edit mode. b.Some programmes with the channel number shown in the programme table indicate there is no station name assigned. Picture adjustment Note: Picture menu options are not available for RGB input source. PSM (Picture Status Memory) 1. Press the MENU button and then D DD / E EE button to select the Picture menu . 2. Press the G GG button to select PSM. 3. Press the G GG button and then D DD / E EE button to select a picture setting on the PSM pull-down menu. { CSM{ Contrast{ Brightness{ Colour{ Sharpness{ PSM{DynamicStandardMildGameUserSepiaB_W ( )O}i{OOKOMENU (B-W:Black-White) 4. Press the OK or F FF button. 5. Repeatedly press the MENU button to return to normal TV viewing. The picture Dynamic, Standard, Mild and Game are programmed for good picture reproduction at the factory and cannot be changed. CSM (Colour Status Memory) You can select the picture colour status; standard, reddish, greenish or bluish, as you prefer. 1. Press the MENU button and then D DD / E EE button to select the Picture menu. 2. Press the G GG button and then D DD / E EE button to select CSM. 3. Press the G GG button and then D DD / E EE button to select Sta...
Dieses Handbuch ist für folgende Modelle:Fernseher - 14SR1AB (246.57 kb)